[sdiy] TR-909 reset pin on PSU

[epk]

I guessed that as the solder pad for that connection on the switch  
board is marked /R, but it's definitely nice to have that confirmed!

Thanks!

epk

On Jul 9, 2009, at 9:57 PM, Tony K wrote:

> Just be careful because it's shown as active high in the psu  
> schematic, you need /RESET, active low.
> Also used to 'mute' the voice trigger flip flops at power up/dn.
>
> Miss the cymbals salutation at power up ? ;-)
>
> Tony K
>
>
>
>
>
>
> At 07:11 PM 7/9/2009, epk wrote:
>> .. snip
>