[sdiy] For breadboard lovers...

[Jerry Gray-Eskue]

I take it that you two are using Photo Resist etching?


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl]On Behalf Of Jason Tribbeck
Sent: Thursday, July 09, 2009 4:18 AM
To: Ullrich Peter; Danjel van Tijn; synthdiy DIY
Subject: RE: [sdiy] For breadboard lovers...


Hi,


>> you can etch your own boards with that fine pitch? I would be
impressed....
>
> I etched boards on my own with downto 0.5mm pitch.
> I work with "DIY films" from laser printers - I stack two films for
higher
> contrast.
> 
> No problems!

0.5mm's also no problem for me using an inkjet and a single OHP sheet.
It isn't even opaque, but it's good enough for etching, and pretty cheap
too.

With my earlier printer, I used to run it twice to get the density (I
hadn't thought about using two sheets). The registration was generally
good, but occasionally it would be off.
-- 
Jason Tribbeck

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy