[sdiy] urgent need of ML-303 & MAB-303 schematics ($$$)

[Steph. J]

Thank you Mike

I really appreciate the help. I just offered money in case someone didn't
want to share info but wanted $ for the documents.

My best regards

~Steph

On Sun, 25 Jan 2009 12:42:02 -0000, "Mike" <profpep at hotmail.com> wrote:
> You may have trouble with the ML303 - it was a very tight group, and they
> didn't give out details. One member of the group is a member of the
> MIDIbox
> forum, and might be able to help.
> 
> There is post of  the modified 303 schematic analog stage from theML303
> here:
>
http://www.midibox.org/forum/index.php?action=dlattach;topic=7548.0;attach=597
> 
> There is a user guide here:
> http://www.sequencer.de/files/ml303guide_user.pdf
> 
> The sequencer part is regarded as closed, though it does use the MIDIbox
> boot code. I may be wrong, but I got the impression that the project was
> closed and limited because some people were ordering large numbers of
> PCB's
> with a view to selling finished unts, and the designers locked it down,
> because they diidn't agree with that
> 
> More details here: http://tb303.km.ua/index1.htm
> 
> If you join the MIDIbox community, you might be able to get some help,
(as
> well as build a few other wonderful design). Don't offer money: MIDIbox
> has
> a strictly 'non-commercial' rule.
> 
> Hope this helps
> 
> ||\/||ike
> 
> ----- Original Message -----
> From: "Steph. J" <info at muzikelektronix.com>
> To: <>
> Sent: Saturday, January 24, 2009 10:45 PM
> Subject: [sdiy] urgent need of ML-303 & MAB-303 schematics ($$$)
> 
> 
>> Hey everyone
>>
>> Dunno if the 303 clone anniversary but I'm I've got quite my share to
>> repair right now (not that I'm complaining, of course). But I doubt I'll
>> have the time to reverse engineer the 2 above-mentioned since I had some
>> serious health problems. I was wondering if you gentlemen had the
> following
>> or was willing to draw the schematics of:
>>
>> 1) Will System MAB-303 (also got the pictures of the 2-side PCB)
>>
>> 2) Acid Code ML-303 Rev.3.0 (can take pictures)
>>
>> Obviously, I will pay for your work.
>>
>> Thanks in advance
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>