[sdiy] urgent need of ML-303 & MAB-303 schematics ($$$)

[Mike]

You may have trouble with the ML303 - it was a very tight group, and they
didn't give out details. One member of the group is a member of the MIDIbox
forum, and might be able to help.

There is post of  the modified 303 schematic analog stage from theML303
here:
http://www.midibox.org/forum/index.php?action=dlattach;topic=7548.0;attach=597

There is a user guide here:
http://www.sequencer.de/files/ml303guide_user.pdf

The sequencer part is regarded as closed, though it does use the MIDIbox
boot code. I may be wrong, but I got the impression that the project was
closed and limited because some people were ordering large numbers of PCB's
with a view to selling finished unts, and the designers locked it down,
because they diidn't agree with that

More details here: http://tb303.km.ua/index1.htm

If you join the MIDIbox community, you might be able to get some help, (as
well as build a few other wonderful design). Don't offer money: MIDIbox has
a strictly 'non-commercial' rule.

Hope this helps

||\/||ike

----- Original Message ----- 
From: "Steph. J" <info at muzikelektronix.com>
To: <>
Sent: Saturday, January 24, 2009 10:45 PM
Subject: [sdiy] urgent need of ML-303 & MAB-303 schematics ($$$)


> Hey everyone
>
> Dunno if the 303 clone anniversary but I'm I've got quite my share to
> repair right now (not that I'm complaining, of course). But I doubt I'll
> have the time to reverse engineer the 2 above-mentioned since I had some
> serious health problems. I was wondering if you gentlemen had the
following
> or was willing to draw the schematics of:
>
> 1) Will System MAB-303 (also got the pictures of the 2-side PCB)
>
> 2) Acid Code ML-303 Rev.3.0 (can take pictures)
>
> Obviously, I will pay for your work.
>
> Thanks in advance
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>