[sdiy] Which 1/4" Jack?

[cheater cheater]

I replaced one of those sockets with a jack tip inside it for some dj
just before the gig. He's one of my best buddies now :P funny how that
works

On Sun, Jan 18, 2009 at 10:43 AM, Oakley Sound
<oakleylist at btinternet.com> wrote:
> Florian, thanks for the photos. Yes, there is a problem there. It seems a
> lot of these newer compact and cheaper jack sockets aren't quite so good as
> the old style ones.
>
> Graham, it was I who suggested the 112APC, and not Florian. I was pointing
> out that there are some excellent sockets made by Switchcraft that when put
> into products can become problematic if not done properly.
>
> But these new fangled low profile plastic things are a different thing
> entirely. I too have had problems with certain jacks types ripping out the
> tip lug on A&H desks when the jack is pulled out.
>
> Tony
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>