[sdiy] Trying to find a DMM Probe...

[harrybissell at wowway.com]

Pomona Electronics ??


On Thu, 15 Jan 2009 14:38:53 -0800, Tom Arnold wrote
> I use a particular type of probes on my DMMs.  Sadly I cannot 
> remember what brand they are to replace them.
> 
> The probes themselves consist of a 5" hardened steel spike with a sharp
> point and the whole thing is dipped in vinyl.  The end that 
> connectors to the meter has a boot molded in to it and you just 
> gator clip inside the boot to the end of the spike.  Only about 
> 1/16" of the probe tip sticks out of the other end and its extremely 
> sharp.
> 
> This ring any bells?   Sadly I've managed to lose one of them so I 
> only have the black from the set.  These are the most unfancy probes 
> you've ever seen, were quite common "back in the day".  I'm hoping 
> this rings a bell and someone can remind me who makes them...
> 
> I'll try and remember to take a picture of my one remaining probe 
> tonight in case that helps ID it...
> 
> -- 
>  -----------------------------------------------------------------
>  - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
>  - SynthGeek        -
>  - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
>  - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
>  --------------------
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


Harry Bissell & Nora Abdullah 4eva