[sdiy] New TOG board: $0.02 needed

[Dan Snazelle]

what happened to this project being for sale?

thanks

--------------------------------------------
check out various dan music at:

 http://www.myspace.com/lossnyc  

(updated monthly)

http://www.soundclick.com/lossnyc.htm



http://www.indie911.com/dan-snazelle

(or for techno) http://www.myspace.com/snazelle

ALSO check out Dan synth/Fx projects:

AUDIO ARK:

www.youtube.com/watch?v=TJRpvaOcUic

www.youtube.com/watch?v=BqIa_lXQNTA&feature=channel_page

www.youtube.com/watch?v=V4nJPjGgOcU&feature=channel_page





> Date: Tue, 6 Jan 2009 22:48:28 -0500
> From: dave at westphila.net
> To: subjectivity at hotmail.com
> CC: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] New TOG board: $0.02 needed
> 
> Any chance of varying the duty cycle dynamically?  Besides the obvious 
> PWM options, static pulses of different width have varying harmonic 
> content and it would be a huge gain in versatility for a lot of the old 
> top octave organs and synths.
> 
> Dave
> 
> Dan Snazelle wrote:
>> sorry i worded that wrong. i already noticed these were the MOST used kind. heck, every single cool project i see uses one of these TOG!
>> 
>> i am in for a bunch of these kits!
>> 
>> thanks for doing this service.
>> 
>> 
>> 
>> --------------------------------------------
>> check out various dan music at:
>> 
>> http://www.myspace.com/lossnyc
>> 
>> 
>> http://www.soundclick.com/lossnyc.htm
>> 
>> 
>> http://www.indie911.com/dan-snazelle
>> (or for techno) http://www.myspace.com/snazelle
>> 
>> 
>> 
>> 
>> 
>> 
>> ----------------------------------------
>>> Date: Tue, 6 Jan 2009 18:11:32 -0800
>>> From: madhun2001 at yahoo.com
>>> Subject: RE: [sdiy] New TOG board: $0.02 needed
>>> To: synth-diy at dropmix.xs4all.nl
>>>
>>> I was planning on making these avaiable.
>>>
>>> I'm not sure which TOG is "most used"; this one emulates the MK50240 series of TOGs.
>>>
>>> Hmm...maybe this should be a Top Octave Generator Assembly so I can call it a TOGA!!
>>>
>>> The chip will be on the board and programmed. Source will be made available so folks can tinker/play/hack/learn/exploit/whatever.
>>>
>>> Current flavors planned:
>>> MK50240 (50% duty cycle)
>>> MK50241 (30% duty cycle)
>>> Just-Intoned
>>>
>>> Under investigation:
>>> High-precision TOG (+/- 0.2 cents error)
>>> Tonewheel TOG
>>>
>>> Hope that helps.
>>>
>>> --TimR
>>>
>>> --- On Tue, 1/6/09, Dan Snazelle  wrote:
>>>
>>>> From: Dan Snazelle 
>>>> Subject: RE: [sdiy] New TOG board: $0.02 needed
>>>> To: madhun2001 at yahoo.com, "sdiy" 
>>>> Date: Tuesday, January 6, 2009, 4:20 PM
>>>> btw////is this board going to sell with the code already on
>>>> the chip and with chip?
>>>>
>>>> if it IS a replacement for the TOG that is most commonly
>>>> used...i will want a bunch!!!
>>>>
>>>>
>>>>
>>>> --------------------------------------------
>>>> check out various dan music at:
>>>>
>>>> http://www.myspace.com/lossnyc
>>>>
>>>>
>>>> http://www.soundclick.com/lossnyc.htm
>>>>
>>>>
>>>> http://www.indie911.com/dan-snazelle
>>>> (or for techno) http://www.myspace.com/snazelle
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ----------------------------------------
>>>>> Date: Tue, 6 Jan 2009 11:37:48 -0800
>>>>> From: madhun2001 at yahoo.com
>>>>> To: synth-diy at dropmix.xs4all.nl
>>>>> Subject: [sdiy] New TOG board: $0.02 needed
>>>>>
>>>>> Hey,
>>>>>
>>>>> I have developed a TOG board using a CPLD to mimic the
>>>> MK50240. Currently it has a crystal oscillator, level
>>>> translators for 5V outputs from the 3.3V CPLD, connector for
>>>> external clocking options, and a recently added 7-stage
>>>> divider. Also a just intoned version is in the works. A
>>>> simple programming change, he said wryly...
>>>>> I need to spin the board one more time. Are there any
>>>> other features you would like to see on the board? I have
>>>> plans for add-in boards for VCO vibrato/pitch bend
>>>> applications and possibly a PLL board for making odd clock
>>>> frequencies. I don't want to burden this board with gobs
>>>> of stuff, but little things like the divider make sense.
>>>>> So if you want to put your 2 cents worth in do so
>>>> today-ish. I'd like to get the board out tonight.
>>>>> --TimR
>>>>> _______________________________________________
>>>>> Synth-diy mailing list
>>>>> Synth-diy at dropmix.xs4all.nl
>>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
>