[sdiy] Moog / MOTM Fixed Filter Bank PCB - interested?

[JH.]

Hi,

some of you may still remember my efforts to make a modern version of the 
Moog Fixed Filter bank (the smaller model, 907) for Synthesis Technology / 
MOTM.

This is a faithful reproduction of the original passive circuit topology, 
but with the inductors replaced with low noise General Impedance Converter 
technology. (Not the "usual" noisy single-opamp Gyrator circuits!)

Now that Paul has announced not to release this as a MOTM module, I have 
decided to offer PCBs for this. (I have a working prototype in my studio for 
many years, so all I have to do is make a PCB layout.)

In order to decide if it makes sense to do this, from an economical point of 
view, I'd like to get some feedback from all who are seriously interested in 
such PCBs. Please send an email to jhaible at debitel.net if interested. (These 
are *not* binding pre-orders yet - just to see how much demand there is.)

As for pricing: It will probably be two 160 x 100 mm PCBs, so I expect a 
price of 54 Euros for the two PCBs.

I know there have been samples published for this (probably by myself, or by 
Paul). If anybody has a link to these samples, please post it.

Looking forward to hear from you,

JH.