[sdiy] DIY modules.. where to start?!

[peter edwards]

Hey Todd,
You're saying that you don't want to build on pre made PCBs right?  
and you're gonna source all your own parts..?
Most kit sites also include the schematics and detailed build  
instructions. eg. MusicFromOuterSpace and CGS.
I HIGHLY recommend that you start with these sites, especially MFOS  
for the super detailed instructions. You can build the circuits from  
the schematics and then if something goes wrong, you have a ton of  
supporting info to refer to. ALSO there are really strong builder  
communities for both of these sites so you'll be able to get lots of  
input if needed.
Once you've built a few of those you can move on to the more obscure  
circuits that may be amazing but aren't as well documented. Tellun  
(www.tellun.com) designs some really cool stuff.
Yusynth is good too. These guys both have good, well documented  
circuits.
-pete
casperelectronics.com


On Feb 15, 2009, at 6:59 PM, Todd Sines wrote:

> against my own better judgement [and time management] I want to  
> start building a few of my own modules.
>
> I don't want to build from kits, I am determined to figure out  
> schematics.
> I want to start with some simple but still useful things like  
> filters, like the Moog diode ladder filter, etc.
>
> What would you recommend as the best place to start? They're going  
> to live inside a not so populated Frac rack.
> Hence, my request to build modules for it.
>
> Thanks in advance,
>
>
>
> +odd
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy