[sdiy] DIY modules.. where to start?

[Jason Proctor]

CGS is a good place to start. most/all the schems are up on Ken's 
site, and his PCBs are cheap.

http://cgs.synth.net

there isn't a Moog-type ladder, but there are all kinds of other goodies.

btw the ladder PCBs that i can easily bring to mind (MOTM-490, Oakley 
Superladder) are MOTM format so i don't know whether they would 
easily fit behind a Frac panel.



>against my own better judgement [and time management] I want to 
>start building a few of my own modules.
>
>I don't want to build from kits, I am determined to figure out schematics.
>I want to start with some simple but still useful things like 
>filters, like the Moog diode ladder filter, etc.
>
>What would you recommend as the best place to start? They're going 
>to live inside a not so populated Frac rack.
>Hence, my request to build modules for it.
>
>Thanks in advance,
>
>
>
>+odd
>
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy