[sdiy] 7905 output voltage, FAQ probably

[John Luciani]

Double check the pinout against the part number printed on the case.

(* jcl *)

On Fri, Feb 6, 2009 at 9:04 PM, Jason Proctor <jason at redfish.net> wrote:
> it's been suggested that i hook it up to a load to get the right voltage.
> off to try that...
>
> :-S
>
>> seems that all of the 7905s i got from mouser recently spit out -6.8v or
>> so instead of -5v. is this normal?
>>
>> the input voltage is a steady -15v, and i'm decoupling the inputs and
>> outputs with 33uf electrolytics. not that changing those or removing them
>> makes any difference.
>>
>> thanks for any pointers with this.
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>



-- 

You can't create open hardware with closed EDA tools.

http://www.luciani.org