[sdiy] Waldorf MW2 encoder problem, any advice?

[cs e]

The MW 1 has only one encoder.  Are you talking about the MW 2 ?

On 2/3/09, Ullrich Peter <Peter.Ullrich at kapsch.net> wrote:
> Hi!
>
> Maybe it is the same problem as with the MW1 encoders.
> They have been wired wrong for some time. It didn't come up during factory
> testing as it works for some
> time (maybe due to overlapping of the contact areas) but after some time
> they stop working properly.
>
> The encoders have a A,B and COMMON contact. Waldorf mixed them up on some
> production series.
> I don't remember which two of these 3 signals need to be changed but if you
> have a multimeter you can
> check and fix it.
>
> You can also search on the internet beacuase some months after I changed my
> MW1 I found an article on the web...
>
> Ciao
> Peter
>
>