[sdiy] Dual/quad opamp bleed-through
Oakley Sound
oakleylist at btinternet.com
Sun Feb 1 10:54:24 CET 2009
> Do any of these synths have unintentional oscillator sync problems?
Minimoog; no, in any of the three variants. But there is a belief that
the power supply in the Mini is noisy enough so as to disrupt any soft
syncing between the VCOs.
ARP 2600; no. But this is because all the VCOs, although sharing the
same board, have completely separate power supply lines back to the
power supply module. ARP must have known there was a potential problem
to take the hassle of three extra Molex headers and associated wiring.
MS-20; yes. Soft sync is evident on many units I have seen. But only
when you try to set the pitches very close to one another.
Tony
www.oakleysound.com
More information about the Synth-diy
mailing list