[sdiy] AL3201

[karl dalen]

I got all the AL chips back in the old days but haven't done anything
with them, i remember there was something ape with the assembler, anyhow
the 3201 with a different single chip codec would be neat! Wonder if there
are any ofshelf industry standard (besides coolaudios) that fit the 3201
chip?

KD

--- Den fre 2009-12-18 skrev Eric Brombaugh <ebrombaugh1 at cox.net>:

> Från: Eric Brombaugh <ebrombaugh1 at cox.net>
> Ämne: Re: [sdiy] TipTop Z DSP fuss!
> Till: "karl dalen" <dalenkarl at yahoo.se>
> Kopia: Synth-diy at dropmix.xs4all.nl
> Datum: fredag 18 december 2009 01.22
> On 12/17/2009 01:35 PM, karl dalen
> wrote:
> > i saw it later it
> > was based on the FV1 and so are the Z5000, Midiwall
> claims that
> > in one posting.
> 
> Ah - well then, straight from the mouth of someone who
> ought to know. I based my guess that it was the Alesis part
> based on the fact that they used only 1 CV input. The Alesis
> part doesn't have an analog input, but the docs do describe
> how to use a host processor to force external ADC data into
> it via the I2C bus. Also, if purchased from Coolaudio
> they're _really_ cheap compared to the FV-1 which runs near
> $10 even for moderate quantities.
> 
> > Btw i just asked Spin about the DV1, perhaps next year
> they said,
> > well we have heard that for the last 4 years now!
> 
> It'll be interesting to see what eventually turns up.
> Hopefully something with a bit more delay memory & I/O.
> 
> Eric
> 


      __________________________________________________________
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling. 
Sök och jämför priser hos Kelkoo.
http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325