[sdiy] Source for M6x0.75 Nuts

[Tom Corbitt]

On the nuts and bolts hardware side, I'm a firm believer that if you
can't get it from McMaster, you don't need to be using it in a design.

Try part # 91415A040

Metric Zinc-Plated Steel Fine Thread Hex Nut Class 6, M6 Screw Size,
.75mm Pitch, 10mm W, 5mm H
In stock at $9.24 per Pack
This product is sold in Packs of 50

http://www.mcmaster.com/#91415a040/=4z2v1m

I'm sure smallparts would have it as well, just to lazy to look.

Tom C

They are pretty good on shipping costs (and the exchange rate will be
working in your favor.)


On Thu, Dec 17, 2009 at 2:13 PM, Tom Bugs <admin at bugbrand.co.uk> wrote:
> Hi all,
>
> Gah -- I really need to source some fine-thread M6 nuts but can't find them
> for the life of me...
>
> Regular M6 nuts are 1mm thread - I need 0.75mm thread - like on miniature
> toggle switches, for example.
>
> Ideally I need a regular source for many at a time - preferably UK, but not
> necessarily...
> Steel (no need for stainless) would be best but could maybe do with nylon if
> all else fails...
>
> Thanks for any help!
> Tom/BugBrand
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>