[sdiy] dspic programmer

[karl dalen]

Just when i had asked i found one, quite decent to for anyone who
wants just a programmer! And it also program various serial memories to.
Btw, I often use Phonyprog for my AVR projects.

http://sites.google.com/site/ehobbyprojects/pic-dspic-microcontroller-programmer

http://www.winpic800.com/index.php?lang=en

Anyho, its not a matter of gaining on cost, just the talibanistic idea
of diy, but a pickit2 will mostly be road to go,MPlab debugging are
strong point.

Just saw that ordering samples arent available anymore! 
I who just had grew fond of the so28, FJ64GP802! ;(

Reg
Kd 

--- Den sön 2009-12-13 skrev Eric Brombaugh <ebrombaugh1 at cox.net>:

> Från: Eric Brombaugh <ebrombaugh1 at cox.net>
> Ämne: Re: [sdiy] dspic programmer
> Till: "sdiy diy" <synth-diy at dropmix..xs4all.nl>
> Datum: söndag 13 december 2009 04.10
> 
> On Dec 12, 2009, at 12:41 PM, Antti Huovilainen wrote:
> 
> > On Sat, 12 Dec 2009, karl dalen wrote:
> > 
> >> Are there any DIY dsPIC programmer similar to the
> simple AVR's 4 resistor P-port programmer or RS232? Or
> should i just go and buy a Pickit2? (i dont want to,it
> violates the absolute DIY sect rules/karma). :)
> > 
> > IIRC, there were several projects on the net for it.
> I'd just go and buy the cheapest programmer from microchip
> directly. It costs so little that any DIY effort will hard
> pressed to cost as little unless you have all the parts
> laying around.
> 
> What he said.
> 
> Plus, if you get one that's supported by MPLAB then you can
> use the debugger too. Handy when trying to decipher the
> cryptic documentation.
> 
> Eric
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 


      __________________________________________________________
Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling. 
Sök och jämför priser hos Kelkoo.
http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325