[sdiy] Divide by 10^6?

[flightofharmony]

OK, now I see. Good idea!

Best regards, 

~flight
flight at flightofharmony.com
http://www.flightofharmony.com

> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
> bounces at dropmix.xs4all.nl] On Behalf Of Ingo Debus
> Sent: Sunday, August 30, 2009 8:59 AM
> To: synth DIY
> Subject: Re: [sdiy] Divide by 10^6?
> 
> 
> Am 28.08.2009 um 21:41 schrieb flightofharmony:
> 
> >
> >> But if I wanted a flashing LED to indicate a delay time, I'd want it
> >> to flash exactly at the intervals according to the delay time. This
> >> way you could adjust the delay time on the fly to match the groove.
> >>
> >> Ingo
> >
> > What do you mean by "exactly at the intervals"?
> 
> I just meant, if the delay time is, say, 0.5 seconds, I'd want the
> LED to light up once every half second. You'd achieve this by
> choosing a divisor equal to the product of delay time and clock
> frequency, or, in other words, how many clocks it takes to move the
> signal through the delay line. According to the table at the end of
> the PT2399 data sheet this must be something around 684000.
> 
> Ingo
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy