[sdiy] Polymoog Resonantor Clone PCB preview

[JH.]

Hi,

I'm taking pre-orders for these PCBs now.

(See http://www.jhaible.de/resonator/resonator.html for details about the project.)

Pricing is EUR 27.00 per board

plus a single EUR 6.00 shipping flat charge for worldwide shipping,

regardless how many boards you are ordering and where you live.

It does *not* include any customs fees or tax that you may (or may not) have

to pay in your county.

What you get is a double-sided printed circuit board with component overlay,

approx. size 160mm x 100mmm.

You have to buy the electronic components for this, and build the device,

yourself. (Check the above website regularly for updates and building hints,

bill of matrials etc.)

I reserve the right to cancel orders if a certain number of total orders isn't reached.

But I will not take any money before I actually have th emanufactured boards in my hands!

If you want to place a pre-order, please send me an email to the following

adress:

jhaible at debitel.net

and use the FOLLOWING FORM (fill in your data instead of [],

for instance: "2 Boards" instead of "[quantity] Boards")

===== Start of Email Order Form ===============

Email Subject line: Polymoog Resonator order: [quantity] boards

Email text:

I'm ordering [quantity] pieces of the Polymoog Resonator PCB

for EUR 27.00 per board + EUR 6.00 single shipping flat charge for any

number of boards.

I'm aware that I may have to pay additional amounts of customs and tax in my

country.

I'm also aware that I'm only buying blank PCBs that may help me building an

electonic module - I'm *not* buying a diy kit, not a "project" - just pieces

of FR4 with copper traces.

I know how to build electronic circuits and I am trained in electrical safety matters.

The seller of these PCBs will not be held responsible for any damage that results

from these PCBs, directly or indirectly.

My shipping adress is

[Your Name]

[Your street, number, city, ZIP code, in exactly the form

that is generally used in your country]

[your country]

My paypal adress is [your paypal adress].

I===== End of Email Order Form =========

Looking forward to hear fom you :)

JH.

----- Original Message ----- 
From: "Michael Zacherl." <sdiy-mz01 at blauwurf.info>
To: "JH." <jhaible at debitel.net>
Cc: "Eric Schoerghofer" <eric.schoerghofer at utanet.at>
Sent: Wednesday, August 12, 2009 9:56 AM
Subject: Re: [sdiy] Polymoog Resonantor Clone PCB preview


Hi Jürgen,

    great!!

What supply voltages can be used with that?

BTW, Kenneth Elhardt ripped out the original of his Polymoog and demos
it here:
<http://www.youtube.com/watch?v=_XUiJi5153Y&fmt=18>

    Michael.  :-)

On Aug 12, 2009, at 8:18 AM, JH. wrote:

> http://electro-music.com/forum/phpbb-files/poly_m_reso_preview_769.jpg
>
> This was an easy one to layout.
>
> And it will be an easy project to solder, this time!
>
> And unexpensive, too. Depends on the potentiometers or sliders
> you're going to use. PCB will be 27 Euros as usual. Electronic
> components will be very unexpensive. Potentiometers, enclosure etc
> will make the biggest part of the bill here.
>
> I've painstakingly taken care to preserve the character of the
> original, using the same low slewrate opamps, MOSFET switches, and DC
> bias (which results in very unsymmetric headroom) as the original.
> You can use modern opamps instead, of course. And there is plenty of
> space to use whatever capacitors you like, in the filter
> sections. No problem to go for a High End version with polystyrene
> caps and modern audio opamps, if you like. But you can - and I
> will, for my self - just build it like the original.
>
> Send me an email if you're interested in this. If I get enough
> "resonance", I will start a PCB run in a month or so.
>
> (No audio demos yet - I must first have one prototype made for
> myself!)
>
> JH.




--
noise chasers: http://blauwurf.at