OT Re: [sdiy] Bob Moog - Mini pulse widths

[tj]

I put up a few samples of my 1974 Mini with the middle revision "741"  
oscillator board. Was able to get samples direct from oscillators and  
after filter, VCA at the high output. Filter and VCA wide open, no  
resonance, the waveforme get quite dirty, compared to the originals.

Also sampled my 40 year old 1P with a build date of August 1969. There are  
raw samples of the 901 oscillators waveforms. Then after the CP3 mixer,  
both at unity gain (about 7 on the mixer input and 10 for the mixer out),  
and double gain with mixer inputs set at 10. (The CP3 has 2X gain.)The  
mixer is part of the sound as they overdrive. Next individual waves after  
an open 904A with no resonance. And some combinations of the three  
oscillators at different gains. Finally a few samples after the 902 VCA.  
(needs a little offset adjust.)

Not sure if these are of any use? But they are fun to observe how the  
different modules, shape and interact along the way. Two pages, one with  
Mini, one modular. Zip files at bottom with all waves. No magic, just a  
unique tone!

Mini page:
http://mysite.verizon.net/vze6s1hi/moog1p/id3.html

Modular page:
http://mysite.verizon.net/vze6s1hi/moog1p/id2.html

> Better yet:
> if you have a digital multitrack, please record each of the VCOs
> separately, and the mix before the filter, and the mix after the
> filter before the vca, and the mix after the vca. All at once, so that
> we can see what happens where.
>
> I bet Bob Moog would have loved to be able to analyze his circuits like  
> this :)
>