[sdiy] Danish screws (was eurorack tapped strip (in M3) source pref. uk?)

[John Alex Hvidlykke]

Hi Andreas

What about these shops?

http://elektronik-lavpris.dk/product_info.php?products_id=86796

https://www1.elfa.se/elfa~dk_da/b2b/catalogstart.do?tab=catalog

http://www.elextra.dk/main.aspx?page=article&artno=H16969

I have walked in the mentioned shops numerous times, and they all carry 2.5
mm. bolts. Some of the links are to assortment boxes that contains both 2.5
and 3.0 bolts - which should sort out the original pronlem too ;-)

Regards

John



> -----Oprindelig meddelelse-----
> Fra: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl]På vegne af Andreas
> Wetterberg
> Sendt: 30. juli 2009 23:11
> Til: synthdiy DIY
> Emne: Re: [sdiy] eurorack tapped strip (in M3) source pref. uk?
>
>
> Tom Arnold skrev:
> > Or, just buy 2.5mm screws which are available *everywhere* and
> cheaper then
> > buying the inserts, and then when you pick up surplus subracks with the
> > standard 2.5mm rails ( Doepfer did not choose to use standard
> rails ) your
> > stuff will just work...
> To clarify; the 2.5mm screws are NOT available everywhere. I cannot
> stress this enough! As an example I can tell you that I haven't found a
> walk-in shop in Denmark that carries them - 3mm is the smallest standard
> screw.
>
> They are, however, available at shops like www.rapidonline.co.uk
>  - example: the traditional length (6mm, if I recall correctly?)
> available here:
> http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/Fa
steners-Fixings/Nuts-Screws-Washers/Pan-head-Pozidriv-screws/64727

best,
Andreas
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.36/2272 - Release Date: 07/30/09
05:58:00