[sdiy] power rails and Ground in Eagle

[Jan Robert]

Changing the width in the net classes dialog doesn't affect the width of 
the traces that are already routed.
But the autorouter uses the width defined in the net calsses dialog. 
Simply rip up the power supply traces and autorout them again.
If you don't want to rip up all your power supply traces you may need a 
command script like Manuel suggested.

Jan

Ingo Debus schrieb:
>
> Am 14.04.2009 um 12:12 schrieb Jan Robert:
>
>> In the schemtaics editor go to Edit -> Net classes. Define a new net
>> class 'Power' with the desired width. Then  use the  'INFO' tool on
>> your supply traces and change  the net class from  default to  'Power'.
>>
>
> But this doesn't change the width of the traces, does it? It just 
> causes the design rule check to complain about too narrow traces.
>
>
>> Ian Smith schrieb:
>>> Hey all,
>>> quick, silly question. How do you make the supply traces wider than 
>>> the regular traces in Eagle... I know how to change the width of 
>>> traces but only in an all-or-nothing sort of way.
>
> Not sure what you mean here. With the wrench tool / Change command you 
> can change the width of each trace segment separately.
>
> Ingo
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>