[sdiy] 19" 1u rack Front PANEL Designs? (FPD)

[Laurie Biddulph]

Currently the sub-racks I offer do not have a facility for mounting either 
rear connectors (such as DIN connectors) or card guides. Both of these 
require that the sub-rack has an additional 2 rails fitted to the back, at 
which point it is possible to install card guides. There are 2 options for 
rear rails, one being to accept standard DIN connectors the other to accept 
a backplane. Needless to say these extra rails will add slightly to the cost 
of the rack and may make them less attractive if offered with this as a 
standard feature.

Also you would need to use the 220mm deep racks to allow for standard 160mm 
deep Eurocard to be installed along with connectors etc.

Best Regards

(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645

Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com

This e-mail and any files transmitted with it are confidential and intended 
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or 
otherwise use it, or any part of it, in any form whatsoever. If you have 
received this e-mail in error please notify the sender and ensure that all 
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the 
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence 
of computer viruses, Elby Designs will not be liable for any losses as a 
result of any viruses being passed on.

Please consider the environment before printing this email

----- Original Message ----- 
From: "Samppa Tolvanen" <samppa.tolvanen at gmail.com>
To: "Dan Snazelle" <subjectivity at hotmail.com>
Cc: <synth-diy at dropmix.xs4all.nl>
Sent: Monday, April 13, 2009 8:34 AM
Subject: Re: [sdiy] 19" 1u rack Front PANEL Designs? (FPD)


> On Sun, Apr 12, 2009 at 2:47 PM, Dan Snazelle <subjectivity at hotmail.com> 
> wrote:
>>
>>
>> Does anybody happen to have a template or a link for a 1u 19"rack panel 
>> in FPD?
>> i have tons of single module templates but nothing in a 19" wide.
>>
>
> For what standard?
>
> Samppa
>
> p.s. Ask Elby if his racks accept standard 3U Euro backplanes. Not
> with the dimensions he gave. DIN.. IEC..
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>