[sdiy] 808 220v PSU replacement

[Ingo Debus]

Am 13.04.2009 um 13:07 schrieb orangeyellowred:

> All you need to replace is the transformer. Nothing more.

Looking at the service manual (page 13) it seems to me the primary  
fuse F1 calls for a different value. It sure would work with the  
original fuse when the 115 volts transformer is replaced by a 220  
volts one, but the short-circuit protection wouldn't work as  
relieable as it should.
Why the table in the schematic also calls for different values for  
the secondary side fuses F2...F4, I don't understand. Seems like an  
error to me.

Ingo