[sdiy] tinyscope

[Tom Arnold]

On Fri, Apr 10, 2009 at 09:28:40PM -0700, Tom Arnold wrote:
> http://www.sdiy.org/xyzzy/scope/
> 
> Sorry about poor quality, was in a rush.
> 
> My plan is to make a new front panel, legend it for vertical orientation,
> and rotate the LCD.  I may fail miserably...

Okay, some thoughts on this.

1. Was too tight to rotate the LCD.
2. Does a decent job on signals sofar.  Need to play more with it but it was
tolerable.  More on this later.
3. The kit is a pain to build due to all the SMD and the lack of
instructions and the incorrect instructions ( several parts are labeled
backwards on the board etc ).

I have it working.  There are artifacts on the LCD.  Dunno what from yet,
going to upgrade the code and see if it gets better.

If it does work okay, I'll do a 6" wide Frak module and put some stuff like
precision voltage outputs and an A400 source and the like on the bottom half
of the module.

-- 
 -----------------------------------------------------------------
 - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
 - SynthGeek        -
 - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
 - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
 --------------------