[sdiy] Eagle question

[Csaba Zvekan]

Thanks Peter,

I will try both of your solutions and see which one is nicer (probably 
solution 1.))

Csaba
----- Original Message ----- 
From: "Ullrich Peter" <Peter.Ullrich at kapsch.net>
To: "Csaba Zvekan" <czvekan at gmail.com>; <synth-diy at dropmix.xs4all.nl>
Sent: Thursday, April 09, 2009 9:06 PM
Subject: Re: [sdiy] Eagle question


Hi Csaba!

A net in Eagle (and most other CAD programs) can only have ONE name.
So there are two solutions left:

1.) Create a pseudo part that only has two pins that have a simple graphic 
line as symbol.
As the pins are treated as different nets you can connect TOUCH_TOP to one 
side and YU to the other side.
But you will see this pseudo part in the partlist. You have to switch the 
visbility to NONE so that you can't see the PIN & PAD numbers.

2.) Connect the nets and select one of the two names as new net name.
You can then place a normal text above the wire just for your information 
(it is no net name)
So it looks like two different nets connect to each other but for the CAD it 
is only one net with the selected name and one independent text label.

Ciao
Peter

http://www.ullrich.at.tt


________________________________________
Von: synth-diy-bounces at dropmix.xs4all.nl 
[synth-diy-bounces at dropmix.xs4all.nl] im Auftrag von Csaba Zvekan 
[czvekan at gmail.com]
Gesendet: Donnerstag, 09. April 2009 19:27
An: synth-diy at dropmix.xs4all.nl
Betreff: [sdiy] Eagle question

Sorry guys ,

This is rather a off topic question . All though the end product
should result in a DSP Synth.

Anyway I am building a LCD  Interface between two development
connector types and have them labeled like this


connector 1 , Label 1,    for instance Name    TOUCH_TOP
connector 1 , Label 2,                          Name    TOUCH_LEFT
...

connector 2, Label 1,  has a different Name   YU
connector 2, Label 2,                             Name    XL
...

Now my question is how do I route connector 1, Label 1 with connector
2, Label 1 together without changing their Names ? Does anybody know ?
Any help greatly appreciated.

Csaba
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy