[sdiy] vco's

[Dave Magnuson]

----- Original Message ----- 
From: "Ian Fritz" <ijfritz at comcast.net>
To: "Dave Magnuson" <KingRavine at comcast.net>; "Scott" <Scott at scottwick.com>; 
<synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, April 07, 2009 2:25 PM
Subject: Re: [sdiy] vco's


> At 10:46 AM 4/7/2009, Dave Magnuson wrote:
>
>>I *can* hear some differences between raw waves of the two VCOs I have 
>>here...
>
>
> Could you possible put clips of these up somewhere so we can hear what you 
> are refering to?
>
> Ian
>

Hi Ian,

I'll try to make some audio clips this weekend.

Unfortunately the only recording device I have in the studio is Minidisc, so 
I'm not certain if the difference will be audible with the compression 
(essentially an MP3).    My computer is two floors away... Man, I need a 
laptop!

The difference is pretty subtle - more "buzzy-ness" on the saw, etc... which 
I assume is a difference in harmonic content.    For reference, I have a 
3340VCO and a trio of EFM VCO4D (which was a Moog Sonic Six clone, IIRC)

Dave