[sdiy] LEDs protruding through front panels

[David G. Dixon]

> Adding to that, if the hole turns out to be a tad too wide, then I made
> best experiences regarding glueing LEDs into the panel with white wood
> glue (like "Ponal Express" in Germany).

I'm thinking of a slightly different approach: Since my panel has two LEDs
at the "0" and "10" points of a pot knob's pointer, it turns out that a line
between the LEDs falls underneath the lip of the pot in the back.  Hence,
I'm going to cut a strip of protoboard two holes wide and solder the LED
leads into it, then use the pot body to hold the centre of the strip down.