[sdiy] What can I do with a couple of MN3005's?

[Kyle Stephens]

An MN3007 can be used here:

http://www.tonepad.com/project.asp?id=8

And audio samples, and some mods, can be found here: 

http://moosapotamus.net/THINGS/wavy.htm

(Link on the Tonepad to the Moosa site is dead)

Dunno designs that use the 3005s off the top of my head, but good luck though :)


_Kyle


--- On Sun, 4/5/09, David Ingebretsen <dingebre at 3dphysics.net> wrote:

> From: David Ingebretsen <dingebre at 3dphysics.net>
> Subject: [sdiy] What can I do with a couple of MN3005's?
> To: "'synthdiy'" <synth-diy at dropmix.xs4all.nl>
> Date: Sunday, April 5, 2009, 1:44 AM
> For reasons I can't justify, I bought
> a couple of MN3005 delay chips and
> clock generators. I also have an MN3007.
> 
> Is there a kit/design out there (preferably with a PCB or
> at least a mask),
> in which I can use these chips?
> 
> No, I'm not anywhere close to designing something on my own
> yet.
> 
> I've got a Blacet TimeMachine, and have been looking at the
> Doepfer delays,
> but would like to build something.
> 
> Thanks for any ideas.
> 
> David
> 
> David M. Ingebretsen M.S., M.E.
> Collision Forensics & Engineering, Inc.
> 2469 East Fort Union Blvd. STE 114
> Salt Lake City, UT 84121
> www.CFandE.com
> 
> 801 733-5458 Office
> 801 842-5451 Cell
> 
> dingebre at CFandE.com
> dingebre at 3dphysics.net
> 
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>