[sdiy] stereo output questions.....

Dan Snazelle subjectivity at hotmail.com
Sat Sep 27 14:46:42 CEST 2008


no i think i mean just plain stereo..not trs

the guy wants to convert a stereo signal (left and right) into an adapter that goes into 2 XLR cables...
i was pretty sure he said STEREO not TRS but he might not know the difference.

so basically if i send an inverted signal to one side and a normal to the other, that is TRS?

thanks

--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc  


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle 




> Date: Thu, 27 Nov 2008 08:10:15 +0100
> From: kokoon at gmail.com
> To: subjectivity at hotmail.com
> Subject: Re: [sdiy] stereo output questions.....
> CC: synth-diy at dropmix.xs4all.nl
> 
> you mean balanced?
> TRS just stands short for tip/ring/sleeve, which means three
> conductors in a configuration otherwise known as "stereo jack". you
> can use them either for stereo (2 channels with common ground) or mono
> balanced audio signal (hot and cold with common ground)
> 
> if you want balanced audio signal, you'll definitely need to invert
> what's coming out of your VCA (along with the non-inverted signal),
> but i guess you'd also have to buffer the output and probably some
> other stuff aswell.
> 
> On Thu, Nov 27, 2008 at 2:35 AM, Dan Snazelle  wrote:
>>
>>
>> i am making something that is supposed to have a stereo output and a mono out.
>>
>> the mono out just connects to my VCA out.
>>
>> i bought a stereo jack (a neutrik) for the stereo side.
>>
>> i assumed it would be ok to just take the OUT signal and copy it to both the LEFT and RIGHT channel solder tabs. is this correct?
>>
>> and on a side note...if i wanted to take the OUT and make it into a TRS setup....how would i connect it?
>>
>> thanks all
>>
>>
>>
>> --------------------------------------------
>> check out various dan music at:
>>
>> http://www.myspace.com/lossnyc
>>
>>
>> http://www.soundclick.com/lossnyc.htm
>>
>>
>> http://www.indie911.com/dan-snazelle
>> (or for techno) http://www.myspace.com/snazelle
>>
>>
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>




More information about the Synth-diy mailing list