[sdiy] Pots from Futurlec

[flightofharmony]

LOL - yes, I and many others know of these. It's been a recent topic. :)
And yes, those knobs will fit. The shaft is the standard T18 - 6mm diameter,
18 splines.
The data sheet for the knob does not say what the optimal shaft length is,
but the 10mm shaft of the Futurlec pots should be fine since the knob is
18mm tall

~flight
flight at flightofharmony.com
http://www.flightofharmony.com

-> -----Original Message-----
-> From: synth-diy-bounces at dropmix.xs4all.nl [mailto:synth-diy-
-> bounces at dropmix.xs4all.nl] On Behalf Of Simon Brouwer
-> Sent: Friday, November 21, 2008 11:42 AM
-> To: sdiy
-> Subject: [sdiy] Pots from Futurlec
-> 
-> Hi all,
-> 
-> Do any of you have experience with pots from Futurlec such as
-> http://www.futurlec.com/Potentiometers/POT100K.shtml
-> ?
-> 
-> And would knobs such as these:
-> http://nl.farnell.com/multicomp/cr-ms-5/knob-soft-touch-spline-
-> shaft/dp/1440013
-> fit on them?
-> 
-> --
-> Vriendelijke groet,
-> 
-> Simon Brouwer
-> -*- nl.openoffice.org -*- http://www.opentaal.org -*-
-> 
-> _______________________________________________
-> Synth-diy mailing list
-> Synth-diy at dropmix.xs4all.nl
-> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy