[sdiy] Heat Sink Compound

[John Blacet]

---The cheapest route is the Radio Shack brand. I've not experienced any
problems with that nor heard of any differences in brands. It is just
basically a glob of non conductive stuff to keep everything at the same
temp.


> I am building several Blacet kits and in the VCO, the instructions say to
> place the thermistor in contact with the matched transistor pair, ok all
> good. But, is there any utility in adding some heat sink grease between
> the
> thermistor and the transistor pair case? If so, is there a particular
> type/brand of heat sink compound that is better to use?
>
> David
>
>
> David M. Ingebretsen M.S., M.E.
> Collision Forensics & Engineering, Inc.
> 2469 East Fort Union Blvd. STE 114
> Salt Lake City, UT 84121
>
> 801 733-5458 Office
> 801 842-5451 Cell
>
> dingebre at CFandE.com
> dingebre at 3dphysics.net
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>


-- 
John Blacet