[sdiy] tr 606 outputs

[Nate Reeves]

i wired it up according to what they had on the analogue solutions  
instructions....

someone on the list mentioned that if you add a 3rd wire to each jack  
output....i forget

i will double check how i have it wired.....maybe i did something  
incorrect....

it looks like 1 wire goes from each of the jacks to a pot leg of each  
sound, then the ground to another piece on the jacks.....

there is still another tab and thats where the 3rd wire goes......


but if i can get away with just using 2 of the connections, then i get  
individual volume control over each sound?!

i assume you can crank up the main volume knob and and adjust the  
others as necessary...

cheers,

nate


On Sep 18, 2008, at 3:05 PM, Samppa Tolvanen wrote:

> Hi,
>
>> as of now they all change volume if anyone is changed
>
> I quite don't get it? Is it wired correctly?
>
> I've done it with switched jacks and this involves lifting one leg of
> the pot. Then Volume control works for both, individial outs and mix
> bus.
>
> Samppa