[sdiy] 74HC14 inverter

[dave]

Hello

It seems that I need +5v to 0v as a trigger. Would the 74HC14 enable me 
to do this ? I have also found a v-trig to s-trig converter :
http://www.synthesizers.com/moog_trigger-convert.jpg
Would I be correct in thinking this circuit would convert my 0v to +5v 
to +5v to 0v ? I am hoping that I dont need a continuos +5v and then 
pulses of 0v... I dont know How I wouldimplement that...Any assistance 
much appreciated regards
dave

dave wrote:
> Hi there People
>
> First time mailing here so go easy on me :) . Ive got a midi to cv 
> trigger pcb with +5v outputs and I need -5v or inverted pulse ( as far 
> as I understand it ) I have been recommended the 74HC14 hex inverting 
> schmitt trigger. Apart from powering the chip do i need anyother parts 
> ( resistors capacitors etc) apart from connecting the input of the 
> chip to the output of my cv trigger? Can I just use the output of the 
> chip to my trigger inputs on the device I am triggering ? Any helponn 
> htis would be greatly appreciated .
> regards
> dave
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>