[sdiy] Eagle

[Paul Maddox]

Guys,

 Thanks I'm working ok now.
Ripup ; did the ripping up. and I had to use the 'invoke' tool to show
the hidden pins on a chip (VEE was connected to VCC instead of GND),
showing these pins seemed to remove the association, and life is good
again :-)

 I wouldn't mind paying for this, if it did bigger boards (400mm x
400mm) I could live with fewer layers (2 layers is fine). But 4 layers
at 160 by 100 is too many layers and not enough board space. and I
can't afford the 1500 dollars for the full version.

On Sun, Sep 7, 2008 at 10:24 PM, ASSI <Stromeko at nexgo.de> wrote:
> On Sonntag 07 September 2008, Paul Maddox wrote:
>>  Thanks for the help, but none of these worked.
>> I select a group (even just half a dozen tracks) and click 'ripup'
>> and it deletes one track.
>
> Eagle doesn't work this way.  You select the command first and then
> the object it applies to.
>
>> and I did have the board open at the same time as the schematic (it
>> does this by default), so I'm at a loss as to why the changes in
>> the schematic haven't been replicated in the board and why I can't
>> rip up the tracks.
>
> Certain changes don't make it into the board.  If you move a wire in
> the schematics, it does not automagically move on the board.  You'd
> have to delete the net in the schematics or remove a component to
> have Eagle ripup the already layouted traces.
>
>>  Even if I rip up the tracks the problem now is that the netlist on
>> the board doesn't match the netlist on the schematic, do I have to
>> re-export it or something?
>
> I'd think this is normal, you may have missed a few pieces (the "show"
> command helps you find these).  After you've done an ERC you should
> see which connections are wrong.  Rip these up on the board,
> calculate the airwires again and all should be fine.
>
>
> Achim.
> --
> +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk]>+
>
> Factory and User Sound Singles for Waldorf Blofeld:
> http://Synth.Stromeko.net/Downloads.html#WaldorfSounds
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>