[sdiy] dust from cutting epoxy/fibreglass boards

[Dan Snazelle]

do you mean you leave the vacuum cleaner running the whole time you are drilling? wow. i would be afraid that if my bit fell off the chuck (which it often does) i would suck up my bit :)

i will try it

thanks

--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


________________________________
From: stefano74 at hotmail.com
To: subjectivity at hotmail.com; oakleylist at btinternet.com; synth-diy at dropmix.xs4all.nl
Subject: RE: [sdiy] dust from cutting epoxy/fibreglass boards
Date: Thu, 4 Sep 2008 11:13:34 +0200








I use a dremel as well.

When I use it, I put a vacuum cleaner close to the area of cut/drilling. In this way I hope to reduce the dust in the rooms where I live.


--)) Stefano ((--



> From: subjectivity at hotmail.com
> To: oakleylist at btinternet.com; synth-diy at dropmix.xs4all.nl
> Date: Wed, 3 Sep 2008 22:59:23 +0000
> CC:
> Subject: [sdiy] dust from cutting epoxy/fibreglass boards
>
>
> when drilling the holes on my pcb boards with a dremel at about half speed, is wearing one of those cheap painters masks (the kind the sell at the dollar store) and having the window open enough? or do i need to buy some kind of pro mask?
>
> someone mentioned a damp rag?
>
> thanks
>
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


________________________________
Scopri i nuovi giochi per il tuo Messenger. Mettiti in gioco!