[sdiy] aaron lanterman's ECE4803 classes on DVD?

[Dan Snazelle]

Ok

I love ECE4803 classes!!!

 But i hate my laptop monitor. So i was wondering. Is there any way to turn the BLIP tv or the Real Player Lectures into DVD's?

I KNOW how to burn DVDS of files that are a bit more common (divx, mpeg,etc) but i am not so sure about these.

On another note, its possible (very possible) that these are heavily compressed versions of the lectures and maybe, if aaron could be convinced to start selling the DVD's as a set, they could be burned as the original HIGH QUALITY UNCOMPRESSED videos!

Then i could watch them (while i am taking notes) on my big screen tv and really be able to see the dry erase board.

that would make my year! (am i a nerd??)

anyway, i have also suggested that aaron make some of his students projects available as PCB projects, or make up a Class T-shirt, all as ways to raise money for his future classes.

I personally have learned a ton. And i think he is a real pioneer for offering such great stuff!

THANKS AARON




--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


> From: subjectivity at hotmail.com
> To: elby_designs at ozemail.com.au; synth-diy at dropmix.xs4all.nl
> Subject: RE: [sdiy] EMERGENCY...rotary knob labelling?
> Date: Mon, 1 Sep 2008 12:26:48 +0000
> CC:
>
>
>
> i bought them from small bear...no brand name
>
> i will try 30 degrees...thanks a million!!
>
> --------------------------------------------
> check out various dan music at:
>
> http://www.myspace.com/lossnyc
>
>
> http://www.soundclick.com/lossnyc.htm
>
>
> http://www.indie911.com/dan-snazelle
> (or for techno) http://www.myspace.com/snazelle
>
>
>> From: elby_designs at ozemail.com.au
>> To: subjectivity at hotmail.com
>> Subject: Re: [sdiy] EMERGENCY...rotary knob labelling?
>> Date: Mon, 1 Sep 2008 22:12:49 +1000
>>
>> Check the datasheet for the switch. It will indicate the step, usually
>> around 30 degrees, this is the spacing you need to use
>>
>> Best Regards
>>
>> (Mr) Laurie Biddulph
>> Phone: +61 (0)2 4340 0938
>> Mobile: 0400 257 645
>>
>> Elby Designs
>> ABN: 70 022 727 605
>> http://www.elby-designs.com
>>
>> This e-mail and any files transmitted with it are confidential and intended
>> for the addressee only.
>> If you are not the addressee you may not copy, forward, disclose or
>> otherwise use it, or any part of it, in any form whatsoever. If you have
>> received this e-mail in error please notify the sender and ensure that all
>> copies of this e-mail and any files transmitted with it are deleted.
>> Any views or opinions represented in this e-mail are solely those of the
>> author and do not necessarily represent those of Elby Designs.
>> Although this e-mail and its attachments have been scanned for the presence
>> of computer viruses, Elby Designs will not be liable for any losses as a
>> result of any viruses being passed on.
>>
>> Please consider the environment before printing this email
>>
>> ----- Original Message -----
>> From: "Dan Snazelle"
>> To: "ChristianH" ;
>> Sent: Monday, September 01, 2008 9:47 PM
>> Subject: [sdiy] EMERGENCY...rotary knob labelling?
>>
>>
>>>
>>>
>>> HI.
>>>
>>> I have a bad situation. My guy is painting on all the labels today on my
>>> panel. But I don't know how far apart to have him space labels on the
>>> rotary switches. let's say you start at 12 o clock and go counter
>>> clockwise, how far apart should the labels be? I can send you a pdf if you
>>> need to see what the labels are....most of the rotary's are 6 position, a
>>> few are 4 or 10.
>>>
>>>
>>> I guess it wont matter too much as long as the names arent too far away
>>> from the pointer. its hard because he has the panel out in another state.
>>>
>>> any ideas? or anyone here have a Front panel designer file that HAS A
>>> ROTARY IN IT?
>>>
>>> thanks a million.
>>>
>>>
>>>
>>> --------------------------------------------
>>> check out various dan music at:
>>>
>>> http://www.myspace.com/lossnyc
>>>
>>>
>>> http://www.soundclick.com/lossnyc.htm
>>>
>>>
>>> http://www.indie911.com/dan-snazelle
>>> (or for techno) http://www.myspace.com/snazelle
>>>
>>>
>>>> Date: Mon, 1 Sep 2008 13:05:12 +0200
>>>> From: chris at chrismusic.de
>>>> To: synth-diy at dropmix.xs4all.nl
>>>> Subject: [sdiy] HKSS BA6110 - are they real?
>>>>
>>>> Hi all,
>>>>
>>>> from what people reported, Hongkong Superseller aka goodbuy711 sometimes
>>>> sends fake chips (uA726), sometimes his stuff sppears to be Ok.
>>>>
>>>> Has anybody around here bought his BA6110 chips? Are they Ok?
>>>>
>>>> regards
>>>> Christian
>>>>
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at dropmix.xs4all.nl
>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy