[sdiy] EMERGENCY...rotary knob labelling?

[Dan Snazelle]

i bought them from  small bear...no brand name

i will try 30 degrees...thanks a million!!

--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


> From: elby_designs at ozemail.com.au
> To: subjectivity at hotmail.com
> Subject: Re: [sdiy] EMERGENCY...rotary knob labelling?
> Date: Mon, 1 Sep 2008 22:12:49 +1000
>
> Check the datasheet for the switch. It will indicate the step, usually
> around 30 degrees, this is the spacing you need to use
>
> Best Regards
>
> (Mr) Laurie Biddulph
> Phone: +61 (0)2 4340 0938
> Mobile: 0400 257 645
>
> Elby Designs
> ABN: 70 022 727 605
> http://www.elby-designs.com
>
> This e-mail and any files transmitted with it are confidential and intended
> for the addressee only.
> If you are not the addressee you may not copy, forward, disclose or
> otherwise use it, or any part of it, in any form whatsoever. If you have
> received this e-mail in error please notify the sender and ensure that all
> copies of this e-mail and any files transmitted with it are deleted.
> Any views or opinions represented in this e-mail are solely those of the
> author and do not necessarily represent those of Elby Designs.
> Although this e-mail and its attachments have been scanned for the presence
> of computer viruses, Elby Designs will not be liable for any losses as a
> result of any viruses being passed on.
>
> Please consider the environment before printing this email
>
> ----- Original Message -----
> From: "Dan Snazelle" 
> To: "ChristianH" ; 
> Sent: Monday, September 01, 2008 9:47 PM
> Subject: [sdiy] EMERGENCY...rotary knob labelling?
>
>
>>
>>
>> HI.
>>
>> I have a bad situation. My guy is painting on all the labels today on my
>> panel. But I don't know how far apart to have him space labels on the
>> rotary switches. let's say you start at 12 o clock and go counter
>> clockwise, how far apart should the labels be? I can send you a pdf if you
>> need to see what the labels are....most of the rotary's are 6 position, a
>> few are 4 or 10.
>>
>>
>> I guess it wont matter too much as long as the names arent too far away
>> from the pointer. its hard because he has the panel out in another state.
>>
>> any ideas? or anyone here have a Front panel designer file that HAS A
>> ROTARY IN IT?
>>
>> thanks a million.
>>
>>
>>
>> --------------------------------------------
>> check out various dan music at:
>>
>> http://www.myspace.com/lossnyc
>>
>>
>> http://www.soundclick.com/lossnyc.htm
>>
>>
>> http://www.indie911.com/dan-snazelle
>> (or for techno) http://www.myspace.com/snazelle
>>
>>
>>> Date: Mon, 1 Sep 2008 13:05:12 +0200
>>> From: chris at chrismusic.de
>>> To: synth-diy at dropmix.xs4all.nl
>>> Subject: [sdiy] HKSS BA6110 - are they real?
>>>
>>> Hi all,
>>>
>>> from what people reported, Hongkong Superseller aka goodbuy711 sometimes
>>> sends fake chips (uA726), sometimes his stuff sppears to be Ok.
>>>
>>> Has anybody around here bought his BA6110 chips? Are they Ok?
>>>
>>> regards
>>> Christian
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>