October 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Oct 1 01:10:59 CEST 2008
Ending: Fri Oct 31 22:23:29 CET 2008
Messages: 955

• [sdiy] Velocity/Position sensing   Grant Richter
  • [sdiy] Velocity/Position sensing   Kevin
    • [sdiy] New VCO: SAW w/TZFM   Ian Fritz
      • [sdiy] New VCO: SAW w/TZFM   JH.
      • [sdiy] JH Frequency shifter and patch cables   David Ingebretsen
      • [sdiy] JH Frequency shifter and patch cables   Scott Juskiw
      • [sdiy] JH Frequency shifter and patch cables   GRAHAM ATKINS
      • [sdiy] JH Frequency shifter and patch cables   JH.
  • [sdiy] Velocity/Position sensing   Kyle Stephens
    • [sdiy] Velocity/Position sensing   jvastine
  • [sdiy] Velocity/Position sensing   Justin Owen
    • [sdiy] Velocity/Position sensing   harrybissell at wowway.com
      • [sdiy] Velocity/Position sensing   Magnus Danielson
• Fwd: [sdiy] ca3280e and a newbie story   Aaron Lanterman
• [sdiy] RE: wiseguy synth products?? walsh chip   Dan Snazelle
  • [sdiy] RE: wiseguy synth products?? walsh chip   Nicholas Gregorich
  • [sdiy] RE: wiseguy synth products?? walsh chip   Kyle Stephens
• [sdiy] AES Journals and Individual papers   Loscha
  • [sdiy] AES Journals and Individual papers   Florian Anwander
    • [sdiy] AES Journals and Individual papers   John Mahoney
• [sdiy] twisted pairs?   George Hearn
  • [sdiy] FS: Metasonix TM-1 Waveshaper / Ring Mod   harrybissell at wowway.com
  • [sdiy] twisted pairs?   David G. Dixon
    • [sdiy] twisted pairs?   Ian Fritz
    • [sdiy] twisted pairs?   harrybissell at wowway.com
  • [sdiy] twisted pairs?   Simon Brouwer
• [sdiy] Weird op amp features & rules of thumb   harrybissell at wowway.com
• [sdiy] slightly OT - K2000 spares   Dave Kendall
  • [sdiy] slightly OT - K2000 spares   GRAHAM ATKINS
• [sdiy] stereo output questions.....   harrybissell at wowway.com
• [sdiy] FPGA based synthesizer progress....   Jim Patchell
  • [sdiy] FPGA based synthesizer progress....   Eric Brombaugh
    • [sdiy] FPGA based synthesizer progress....   Jim Patchell
      • [sdiy] FPGA based synthesizer progress....   Eric Brombaugh
      • [sdiy] FPGA based synthesizer progress....   Jim Patchell
    • [sdiy] FPGA based synthesizer progress....   John Mahoney
  • [sdiy] FPGA based synthesizer progress....   Thomas Laskowski
  • [sdiy] FPGA based synthesizer progress....   Antti Huovilainen
    • [sdiy] FPGA based synthesizer progress....   Eric Brombaugh
    • [sdiy] FPGA based synthesizer progress....   Rainer Buchty
• [sdiy] OT: upright pianos   JH.
  • [sdiy] OT: upright pianos   John Luciani
    • [sdiy] OT: upright pianos   Sam Ecoff
  • [sdiy] OT: upright pianos   Dave Manley
    • [sdiy] OT: upright pianos   JH.
      • [sdiy] OT: upright pianos   Ken Elhardt
      • [sdiy] OT: upright pianos   Florian Anwander
  • [sdiy] OT: upright pianos   David G. Dixon
• [sdiy] testing testing   Paul Maddox
  • [sdiy] testing testing   Magnus Danielson
• [sdiy] VCO design question   David G. Dixon
  • [sdiy] VCO design question   harrybissell at wowway.com
    • [sdiy] VCO design question   Ian Fritz
    • [sdiy] VCO design question   Andre Majorel
  • [sdiy] VCO design question   Antti Huovilainen
  • [sdiy] VCO design question   Ian Fritz
  • [sdiy] VCO design question   Paul Maddox
    • [sdiy] VCO design question   Antti Huovilainen
      • [sdiy] VCO design question   Paul Maddox
      • [sdiy] VCO design question   Antti Huovilainen
      • [sdiy] VCO design question   Paul Maddox
      • [sdiy] VCO design question   karl dalen
      • [sdiy] VCO design question   Kyle Stephens
      • [sdiy] VCO design question   Antti Huovilainen
      • [sdiy] VCO design question   Paul Maddox
      • [sdiy] VCO design question   Tom Wiltshire
    • [sdiy] VCO design question   David G. Dixon
    • [sdiy] VCO design question   David G. Dixon
    • [sdiy] NTE7072 [was: VCO design question]   Aaron Lanterman
• [sdiy] Oakley Stuff   Oakley Sound
  • [sdiy] Oakley Stuff   Tom Wiltshire
• [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
  • [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
    • [sdiy] making 2 or 3 dollars an hour on synth building?   Ian Fritz
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Derek Holzer
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Travis Thatcher
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Paul Schreiber
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Paul Dickow
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Tom Wiltshire
      • [sdiy] making 2 or 3 dollars an hour on synth building?   karl dalen
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Barry Klein
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Tom Wiltshire
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Robert Lorentz
      • [sdiy] Moog ladder (Re: making 2 or 3 dollars an hour...)   John Mahoney
      • [sdiy] Moog ladder (Re: making 2 or 3 dollars an hour...)   Bob Weigel
      • [sdiy] Moog ladder (Re: making 2 or 3 dollars an hour...)   Aaron Lanterman
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Ian Fritz
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Steffen Juul
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Ian Fritz
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Florian Anwander
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Roy J. Tellason
  • [sdiy] making 2 or 3 dollars an hour on synth building?   harrybissell at wowway.com
    • [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Bill Thompson
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Richard Wentk
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Nate Reeves
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Oakley Sound
  • RE: [sdiy] making 2 or 3 dollars an hour on synth building?   rdrake
    • [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
    • [sdiy] making 2 or 3 dollars an hour on synth building?   David G. Dixon
  • [sdiy] making 2 or 3 dollars an hour on synth building?   Robert Lorentz
  • [sdiy] making 2 or 3 dollars an hour on synth building?   Neil Johnson
  • [sdiy] making 2 or 3 dollars an hour on synth building?   Neil Johnson
  • Re: [sdiy] making 2 or 3 dollars an hour on synth building?   rdrake
    • [sdiy] making 2 or 3 dollars an hour on synth building?   Dan Snazelle
  • [sdiy] Re: making 2 or 3 dollars an hour on synth building?   Aaron Lanterman
    • [sdiy] Re: making 2 or 3 dollars an hour on synth building?   Paul Schreiber
      • [sdiy] Re: making 2 or 3 dollars an hour on synth building?   Anthony Rolando
      • [sdiy] Re: making 2 or 3 dollars an hour on synth building?   Donald Tillman
  • [sdiy] Re: making 2 or 3 dollars an hour on synth building?   Aaron Lanterman
  • [sdiy] making 2 or 3 dollars an hour on synth building?   Jim Patchell
    • [sdiy] making 2 or 3 dollars an hour on synth building?   Ken Elhardt
      • [sdiy] making 2 or 3 dollars an hour on synth building?   Jim Patchell
    • [sdiy] making 2 or 3 dollars an hour on synth building?   karl dalen
• [sdiy] DIY Roland M-64C cartridge ?   Ullrich Peter
• [sdiy] interest in audio ark pcb?   Dan Snazelle
• [sdiy] dsPIC33 question..   karl dalen
  • [sdiy] dsPIC33 question..   Tom Wiltshire
    • [sdiy] dsPIC33 question..   karl dalen
      • [sdiy] dsPIC33 question..   Eric Brombaugh
    • [sdiy] dsPIC33 question..   Eric Brombaugh
  • [sdiy] dsPIC33 question..   Eric Brombaugh
    • [sdiy] dsPIC33 question..   karl dalen
      • [sdiy] dsPIC33 question..   Eric Brombaugh
• [sdiy] Have you guys already used this ?   Bert Vermeulen
• [sdiy] My Sequencer   Paul Maddox
  • [sdiy] My Sequencer   Neil Johnson
  • [sdiy] My Sequencer   Pete Swarbrick
    • [sdiy] My Sequencer   Paul Maddox
      • [sdiy] My Sequencer   Jason Proctor
      • [sdiy] My Sequencer   Paul Maddox
  • [sdiy] My Sequencer   Csaba Zvekan
    • [sdiy] My Sequencer   Jason Tribbeck
    • [sdiy] My Sequencer   Florian Anwander
    • [sdiy] My Sequencer   Paul Maddox
  • [sdiy] wallwart supplies   Barry Klein
• [sdiy] some serge/arp/bananalogue PCBs for sale   denshi
• [sdiy] One more dumb question about reflow ovens   brian.walker890 at ntlworld.com
• [sdiy] 2 new ark videos   Dan Snazelle
• [sdiy] MS-20 Filter Clone Queries   Kyle Stephens
  • [sdiy] MS-20 Filter Clone Queries   Aaron Lanterman
    • [sdiy] MS-20 Filter Clone Queries   Tim Stinchcombe
  • [sdiy] MS-20 Filter Clone Queries   Kyle Stephens
    • [sdiy] MS-20 Filter Clone Queries   Aaron Lanterman
  • [sdiy] MS-20 Filter Clone Queries   Antti Huovilainen
• [sdiy] for any sampler addicts in this group   alf holm
• [sdiy] Warm OB-8 multiplexers   Terje Winther
• [sdiy] 2x16 Character LCD   Graham Atkins
  • [sdiy] 2x16 Character LCD   Csaba Zvekan
    • [sdiy] 2x16 Character LCD   Jason Tribbeck
      • [sdiy] 2x16 Character LCD   Graham Atkins
      • [sdiy] 2x16 Character LCD   Julian
      • [sdiy] 2x16 Character LCD   Jason Tribbeck
      • [sdiy] 2x16 Character LCD   Graham Atkins
      • [sdiy] 2x16 Character LCD   Csaba Zvekan
      • [sdiy] 2x16 Character LCD   Steve Carter
      • [sdiy] 2x16 Character LCD   Jason Tribbeck
    • [sdiy] 2x16 Character LCD   Graham Atkins
  • [sdiy] 2x16 Character LCD   Julian
    • [sdiy] 2x16 Character LCD   Jason Tribbeck
    • [sdiy] 2x16 Character LCD   Laurie Biddulph
• [sdiy] (OT) good way to get a synth web site up?   Dan Snazelle
  • [sdiy] (OT) good way to get a synth web site up?   Jim Patchell
  • [sdiy] (OT) good way to get a synth web site up?   Jim Patchell
• [sdiy] Hammond Transformer Question   Romeo Fahl
  • [sdiy] Hammond Transformer Question   Scott Gravenhorst
  • [sdiy] Hammond Transformer Question   Paul Schreiber
    • [sdiy] Hammond Transformer Question   Romeo Fahl
  • SV: [sdiy] Hammond Transformer Question   Karl Ekdahl
  • [sdiy] Hammond Transformer Question   Tom Wiltshire
• [sdiy] Speaking of Arp type chorus....   David Moylan
• [sdiy] What hook-up wire to use for pots, switches & jacks?   jpdesroc at oricom.ca
  • [sdiy] What hook-up wire to use for pots, switches & jacks?   Jim Patchell
• [sdiy] December sale info   Paul Schreiber
• [sdiy] round project enclosures   Paul Dickow
  • [sdiy] round project enclosures   John Luciani
  • [sdiy] round project enclosures   Kyle Stephens
  • [sdiy] round project enclosures   John Mahoney
    • [sdiy] round project enclosures   Paul Dickow
      • [sdiy] round project enclosures   John Luciani
      • [sdiy] round project enclosures   John Mahoney
      • [sdiy] round project enclosures   Paul Dickow
  • [sdiy] round project enclosures   harrybissell at wowway.com
    • [sdiy] round project enclosures   Paul Dickow
    • [sdiy] round project enclosures   Tom Arnold
• [sdiy] Free stuff from Portland OR   johnspeth at yahoo.com
• [sdiy] Schematic/PCB layout best practices   Aaron Lanterman
  • [sdiy] Schematic/PCB layout best practices   Paul Schreiber
    • [sdiy] Trigger Extractor & Window Comparator   Scott Juskiw
  • [sdiy] Schematic/PCB layout best practices   Laurie Biddulph
  • [sdiy] Schematic/PCB layout best practices   Neil Johnson
  • [sdiy] Schematic/PCB layout best practices   John Luciani
• [sdiy] Back at the FPGA synth....   Jim Patchell
• [sdiy] Lazertran and spray lacquer   Justin Owen
  • [sdiy] Lazertran and spray lacquer   Julian
  • [sdiy] Lazertran and spray lacquer   flightofharmony
• [sdiy] Looking for pcb mount 3.5 mm socketsfor in 2.54mm breadboards   Florian Anwander
• [sdiy] Cheap 16x2 LCD Displays   Graham Atkins
• [sdiy] SDIY xmas gifts??   Dan Snazelle
  • [sdiy] SDIY xmas gifts??   Jason Tribbeck
    • [sdiy] Component storage   Louis van Dompselaar
      • [sdiy] Component storage   Jason Tribbeck
      • [sdiy] Component storage   Dave Kendall
      • [sdiy] Component storage   Matthias.Herrmann at jeppesen.com
      • [sdiy] Component storage   John Luciani
      • [sdiy] Component storage   Andre Majorel
      • [sdiy] Component storage   Oakley Sound
      • [sdiy] FS: weller station, optivisors, Tektronix DM501a   Anthony Rolando
      • SV: [sdiy] Component storage   Karl Ekdahl
      • [sdiy] Component storage   Tom Wiltshire
      • [sdiy] Component storage   Joe Grisso
      • [sdiy] Component storage   harrybissell at wowway.com
      • [sdiy] Component storage   Dave Magnuson
      • [sdiy] Component storage   Roy J. Tellason
      • [sdiy] Component storage   Julian
      • [sdiy] Component storage   Jason Tribbeck
  • [sdiy] SDIY xmas gifts??   John Luciani
    • [sdiy] SDIY xmas gifts??   David Betz
      • [sdiy] SDIY xmas gifts??   John Luciani
  • [sdiy] SDIY xmas gifts??   BrightBoy
    • [sdiy] SDIY xmas gifts??   Dan Snazelle
      • [sdiy] Newbie Part Bonanza   Ray Wilson
• [sdiy] oberheim matrix6   Nate Reeves
  • [sdiy] oberheim matrix6   jeff brown
  • [sdiy] oberheim matrix6   Bob Weigel
    • [sdiy] oberheim matrix6   Nate Reeves
  • [sdiy] oberheim matrix6   Nate Reeves
• Fw: [sdiy] Component storage   Laurie Biddulph
• [sdiy] No Bull !!   Graham Atkins
  • [sdiy] No Bull !!   Antti Huovilainen
  • [sdiy] No Bull !!   Horton
    • [sdiy] No Bull !!   Jason Proctor
    • [sdiy] No Bull !!   Adam Schabtach
      • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   Csaba Zvekan
      • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   Paul Maddox
  • [sdiy] No Bull !!   Paul Maddox
    • [sdiy] No Bull !!   Paul Schreiber
      • [sdiy] No Bull !!   Paul Maddox
      • [sdiy] No Bull !!   Jim Palmer
      • [sdiy] No Bull !!   Richard Wentk
      • [sdiy] No Bull !!   Jason Proctor
      • [sdiy] No Bull !!   Colin f
      • [sdiy] No Bull !!   Loscha
      • [sdiy] No Bull !!   Suit & Tie Guy
      • [sdiy] No Bull !!   Richard Wentk
      • [sdiy] No Bull !!   John Mahoney
      • [sdiy] No Bull !!   Brett Maddaford
      • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   karl dalen
      • [sdiy] No Bull !!   Sam Ecoff
      • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   Rainer Buchty
      • [sdiy] No Bull !!   Paul Maddox
    • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   Antti Huovilainen
      • [sdiy] No Bull !!   Graham Atkins
      • [sdiy] No Bull !!   Jason Proctor
    • [sdiy] No Bull !!   J.D. McEachin
      • [sdiy] No Bull !!   Paul Maddox
  • [sdiy] No Bull !!   Simon Brouwer
• [sdiy] odd voltage behavior?!?!   djservs at comcast.net
• [sdiy] Teko enclosures (non round)   Paul Dickow
  • [sdiy] Teko enclosures (non round)   Graham Atkins
• [sdiy] Press-and-peel question   David G. Dixon
  • [sdiy] Press-and-peel question   Derek Holzer
    • [sdiy] Press-and-peel question   Paul Perry
  • [sdiy] Press-and-peel question   johnspeth at yahoo.com
  • [sdiy] Press-and-peel question   Tom Wiltshire
  • [sdiy] Press-and-peel question   David G. Dixon
    • [sdiy] Press-and-peel question   Roy J. Tellason
    • [sdiy] Press-and-peel question   Tim Daugard
  • [sdiy] Press-and-peel question   flightofharmony
• [sdiy] sdiy marriage troubles?   Dan Snazelle
  • [sdiy] sdiy marriage troubles?   Sam Ecoff
    • [sdiy] sdiy marriage troubles?   Roy J. Tellason
  • [sdiy] sdiy marriage troubles?   Roy J. Tellason
  • [sdiy] sdiy marriage troubles?   johnspeth at yahoo.com
  • [sdiy] sdiy marriage troubles?   Dan Snazelle
  • [sdiy] sdiy marriage troubles?   mcb, inc.
    • [sdiy] sdiy marriage troubles?   Csaba Zvekan
      • [sdiy] sdiy marriage troubles?   Robert Lorentz
      • [sdiy] sdiy marriage troubles?   Roy J. Tellason
      • [sdiy] sdiy marriage troubles?   Dan Snazelle
      • [sdiy] sdiy marriage troubles?   drheqx
      • [sdiy] sdiy marriage troubles?   Anthony Rolando
      • [sdiy] sdiy marriage troubles?   Tom Arnold
      • [sdiy] sdiy marriage troubles?   DrHeqx
      • [sdiy] sdiy marriage troubles?   Ian Fritz
      • [sdiy] sdiy marriage troubles?   jvastine
  • [sdiy] sdiy marriage troubles?   flightofharmony
    • [sdiy] sdiy marriage troubles?   jvastine
  • [sdiy] sdiy marriage troubles?   John Mahoney
    • [sdiy] sdiy marriage troubles?   Ken Elhardt
• [sdiy] Maestro Ring Mod - What kind of Jacks?   Romeo Fahl
  • [sdiy] Maestro Ring Mod - What kind of Jacks?   Scott Juskiw
• [sdiy] FS: Last chance to grab a FPGA kit before it goes on the big E   Thomas Laskowski
• [sdiy] FA: [ebay] Polymoog Coffee Table + New Photos   Ken Elhardt
• [sdiy] what cool stuff can i do with 4 sample and hold modules???   Dan Snazelle
• [sdiy] knob spacing   Simon Brouwer
  • [sdiy] knob spacing   Tom Wiltshire
    • [sdiy] knob spacing   Tom Bugs
  • [sdiy] knob spacing   Julian
• [sdiy] Fwd: BBC Music 5000 (circa 1985 ) Lost Recordings   Andre Majorel
• [sdiy] My latest commercial failure... ; )   Julian
  • [sdiy] My latest commercial failure... ; )   GRAHAM ATKINS
• [sdiy] which oscilloscope?   ahlist
  • [sdiy] which oscilloscope?   David Ingebretsen
  • [sdiy] which oscilloscope?   Phillip Harbison
    • [sdiy] which oscilloscope?   George Hearn
      • [sdiy] which oscilloscope?   Tom Wiltshire
• [sdiy] KiCAD   Jim Patchell
• [sdiy] PNW SDIY meet....   Jim Patchell
• [sdiy] FS: Polymoog Synthesizer Parts   Ken Elhardt
• [sdiy] test   jpdesroc at oricom.ca
• [sdiy] Interesting f vs. t graphs of pitch instability   Andre Majorel
  • [sdiy] Interesting f vs. t graphs of pitch instability   Tom Wiltshire
  • [sdiy] Interesting f vs. t graphs of pitch instability   Scott Gravenhorst
    • Random frequency modulation (was [sdiy] Interesting f vs. t graphs of pitch instability)   Tom Wiltshire
      • Random frequency modulation (was [sdiy] Interesting f vs. t graphs of pitch instability)   Scott Gravenhorst
      • Random frequency modulation (was [sdiy] Interesting f vs. t graphs of pitch instability)   Tom Wiltshire
      • Random frequency modulation (was [sdiy] Interesting f vs. t graphs of pitch instability)   Scott Gravenhorst
• [sdiy] Quantix 8 RAM - KM684000, HM628512 Source?   Romeo Fahl
  • [sdiy] Quantix 8 RAM - KM684000, HM628512 Source?   Louis van Dompselaar
    • [sdiy] Quantix 8 RAM - KM684000, HM628512 Source?   David Anderson
• [sdiy] MAT Amp synth supply connector suggestions..   jpdesroc at oricom.ca
  • [sdiy] MAT Amp synth supply connector suggestions..   jpdesroc at oricom.ca
• [sdiy] measuering ac voltage off xfmr   Nate Reeves
• [sdiy] JH Frequency Shifter question   David Ingebretsen
  • [sdiy] JH Frequency Shifter question   JH.
• [sdiy] good way to get single layer Press n peel layouts?   Dan Snazelle
  • [sdiy] good way to get single layer Press n peel layouts?   Jason Tribbeck
    • [sdiy] good way to get single layer Press n peel layouts?   Rainer Buchty
  • [sdiy] good way to get single layer Press n peel layouts?   Matthias.Herrmann at jeppesen.com
    • [sdiy] good way to get single layer Press n peel layouts?   Dan Snazelle
  • [sdiy] good way to get single layer Press n peel layouts?   Ben Lincoln
  • [sdiy] good way to get single layer Press n peel layouts?   David G. Dixon
    • [sdiy] good way to get single layer Press n peel layouts?   Grant Richter
      • [sdiy] good way to get single layer Press n peel layouts?   ASSI
• [sdiy] Electronics Now Magazine / PAIA Drum Oscillator / Thumb Drum   David Moylan
  • Re: [sdiy] Electronics Now Magazine / PAIA Drum Oscillator / Thumb Drum   rdrake
  • [sdiy] Electronics Now Magazine / PAIA Drum Oscillator / Thumb Drum   Justin Owen
• [sdiy] Eagle Layout Screencast   Manuel Odendahl
• [sdiy] Cleaning assembled PCBs   Karl Ekdahl
  • [sdiy] Cleaning assembled PCBs   Tom Arnold
    • [sdiy] Cleaning assembled PCBs   Samppa Tolvanen
  • [sdiy] Cleaning assembled PCBs   GRAHAM ATKINS
  • [sdiy] Cleaning assembled PCBs   KA4HJH
    • [sdiy] Cleaning assembled PCBs   John Mahoney
      • [sdiy] Cleaning assembled PCBs   Samppa Tolvanen
    • [sdiy] Cleaning assembled PCBs   KA4HJH
      • [sdiy] Cleaning assembled PCBs   John Mahoney
  • [sdiy] Cleaning assembled PCBs   Robert Lorentz
  • [sdiy] Cleaning assembled PCBs   Karl Ekdahl
• [sdiy] 0-5 Volt dc generator   Cory Scott
  • [sdiy] 0-5 Volt dc generator   Paul Perry
    • [sdiy] 0-5 Volt dc generator   Tom Bugs
• [sdiy] yamaha spx-90 blown p/s caps   Nate Reeves
  • [sdiy] yamaha spx-90 blown p/s caps   Roy J. Tellason
    • [sdiy] yamaha spx-90 blown p/s caps   Nate Reeves
      • [sdiy] yamaha spx-90 blown p/s caps   Roy J. Tellason
      • [sdiy] yamaha spx-90 blown p/s caps   Nate Reeves
  • [sdiy] yamaha spx-90 blown p/s caps   Nate Reeves
    • [sdiy] yamaha spx-90 blown p/s caps   GRAHAM ATKINS
      • [sdiy] yamaha spx-90 blown p/s caps   Tom Wiltshire
      • [sdiy] yamaha spx-90 blown p/s caps   Stewart Pye
    • [sdiy] yamaha spx-90 blown p/s caps   Nate Reeves
• [sdiy] PNW SDIY Meeting   Jim Patchell
• [sdiy] Oberheim OB-1 service manual   Karl Ekdahl
• [sdiy] Paia pin patch cables & the going rate for a Paia 2720   Karl Ekdahl
  • [sdiy] Paia pin patch cables & the going rate for a Paia 2720   Travis Thatcher
    • [sdiy] Paia pin patch cables & the going rate for a Paia 2720   Karl Ekdahl
• [sdiy] roland dep-5   Nate Reeves
  • [sdiy] roland dep-5   Gil W.
  • [sdiy] roland dep-5   Gil W.
• [sdiy] TCA350Z pinout   Werner Flügel
  • [sdiy] TCA350Z pinout   Steve Lenham
    • [sdiy] TCA350Z pinout   Werner Flügel
• [sdiy] CR2477 Lithium battery for synths   Gil W.
• [sdiy] FPGA based synth update   Jim Patchell
• [sdiy] Rapid Electronics Oktoberfest   GRAHAM ATKINS
  • [sdiy] Rapid Electronics Oktoberfest   Florian Anwander
    • [sdiy] Rapid Electronics Oktoberfest   Eric Brombaugh
    • [sdiy] Rapid Electronics Oktoberfest   floppy
    • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   Michael Zacherl
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   Mark Smart
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   John Mahoney
      • [sdiy] Black LEDs   Michael Zacherl
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   Samppa Tolvanen
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   Michael Zacherl
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   Samppa Tolvanen
      • [sdiy] Black LEDs (was: Re: Rapid Electronics Oktoberfest)   John Mahoney
      • [sdiy] Black LEDs   DrHeqx
      • [sdiy] Black LEDs   Michael Zacherl
    • [sdiy] Rapid Electronics Oktoberfest   Florian Anwander
      • [sdiy]Oktoberfest and LED pollution on to vintage LEDs   Aaron Day
      • [sdiy] ... LED pollution on to vintage LEDs   John Mahoney
      • [sdiy] ... LED pollution on to vintage LEDs   Aaron Day
      • [sdiy] ... LED pollution on to vintage LEDs   Paul Perry
      • [sdiy] ... LED pollution on to vintage LEDs   Dan Snazelle
      • [sdiy] ... LED pollution on to vintage LEDs   Nate Reeves
      • [sdiy] ... LED pollution on to vintage LEDs   Dan Snazelle
      • [sdiy] ... LED pollution on to vintage LEDs   Rainer Buchty
      • [sdiy] ... LED pollution on to vintage LEDs   Anthony Rolando
      • [sdiy] ... LED pollution on to vintage LEDs   Dan Snazelle
      • [sdiy] ... LED pollution on to vintage LEDs   John Mahoney
      • [sdiy] ... LED pollution on to vintage LEDs   Michael Zacherl
      • [sdiy] ... LED pollution on to vintage LEDs   Anthony Rolando
      • [sdiy] Tons of vintage stuff...pre -ebay offering/appreciate hints as to value on some things..   Bob Weigel
      • [sdiy] ... LED pollution on to vintage LEDs   Robin Whittle
  • [sdiy] Rapid Electronics Oktoberfest   John Mahoney
• [sdiy] home drilling via and trace sizes?   Dan Snazelle
  • [sdiy] home drilling via and trace sizes?   Adam Schabtach
    • [sdiy] home drilling via and trace sizes?   Eric Brombaugh
      • [sdiy] home drilling via and trace sizes?   Adam Schabtach
  • [sdiy] home drilling via and trace sizes?   harrybissell at wowway.com
• [sdiy] cheap non-click buttons   ahlist
• [sdiy] Envelope followers   Sean Ellis
• [sdiy] Brass etching using inkjet paper or press-n-peel?   Per Mattsson
  • [sdiy] Brass etching using inkjet paper or press-n-peel?   Paul Perry
    • [sdiy] Brass etching using inkjet paper or press-n-peel?   julian Schmidt
• [sdiy] Its ALIVE! I tell you...Its ALIVE!   Jim Patchell
  • [sdiy] Its ALIVE! I tell you...Its ALIVE!   Jason Proctor
    • [sdiy] tools and materials for sale   Bob Roesler
      • [sdiy] Re: tools and materials for sale   Bob Roesler
  • [sdiy] Its ALIVE! I tell you...Its ALIVE!   David Moylan
• [sdiy] pseudo-random tone generator   Ian Smith
  • [sdiy] pseudo-random tone generator   Dan Snazelle
    • [sdiy] pseudo-random tone generator   Ian Smith
    • [sdiy] pseudo-random tone generator   Anthony Rolando
      • [sdiy] pseudo-random tone generator   Ian Smith
      • [sdiy] pseudo-random tone generator   Dan Snazelle
      • [sdiy] pseudo-random tone generator   Dan Snazelle
      • [sdiy] pseudo-random tone generator   Ian Smith
      • [sdiy] pseudo-random tone generator   Tom Wiltshire
      • [sdiy] pseudo-random tone generator   Paul Perry
  • [sdiy] pseudo-random tone generator   Scott Gravenhorst
    • [sdiy] pseudo-random tone generator   Dan Snazelle
      • [sdiy] pseudo-random tone generator   Dan Snazelle
• [sdiy] VCS3 Power supply   Tom Arnold
• [sdiy] Muse Receptor Plug-in player   Tom Wiltshire
• [sdiy] FPGA based synthesizer progress report....   Jim Patchell
  • [sdiy] FPGA based synthesizer progress report....   Tom Wiltshire
  • [sdiy] FPGA based synthesizer progress report....   Eric Brombaugh
  • [sdiy] FPGA based synthesizer progress report....   harrybissell at wowway.com
• [sdiy] Idea for DCO   Cornutt, David K
• [sdiy] SSM2164 state-variable filter PCB now available   Neil Johnson
  • [sdiy] SSM2164 state-variable filter PCB now available   Scott Nordlund
  • [sdiy] SSM2164 state-variable filter PCB now available   Michael Zacherl
• [sdiy] Anyone interested in a Kenton Polysix MIDI kit ?   Gil W.
• [sdiy] Aftertouch on YS-25D   Bob Weigel
  • [sdiy] Aftertouch on YS-25D -> YC-25D?   Florian Anwander
    • [sdiy] Aftertouch on YS-25D -> YC-25D?   Bob Weigel
      • [sdiy] Re: Aftertouch on YC-25D   dragon.servicing
  • [sdiy] Aftertouch on YS-25D   Bob Weigel
• [sdiy] Fpga Synth (yet another) update....   Jim Patchell
• [sdiy] adding multiple signal/cv inputs: SSM2044   Dan Snazelle
  • [sdiy] adding multiple signal/cv inputs: SSM2044   harrybissell at wowway.com
    • [sdiy] adding multiple signal/cv inputs: SSM2044   Dan Snazelle
      • [sdiy] adding multiple signal/cv inputs: SSM2044   harrybissell at wowway.com
• [sdiy] FM math question   Ian Fritz
  • [sdiy] FM math question   Richard Wentk
  • [sdiy] FM math question   David Moylan
  • [sdiy] FM math question   Magnus Danielson
    • [sdiy] FM math question   ASSI
      • Fwd: [sdiy] FM math question   Mattias Rickardsson
      • Fwd: [sdiy] FM math question   ASSI
      • Fwd: [sdiy] FM math question   ASSI
  • [sdiy] FM math question   Mattias Rickardsson
    • [sdiy] FM math question   Ian Fritz
      • [sdiy] FM math question   Mattias Rickardsson
      • [sdiy] FM math question   harrybissell at wowway.com
      • [sdiy] FM math question   Ian Fritz
      • [sdiy] FM math question   Magnus Danielson
  • [sdiy] FM math question   Magnus Danielson
• [sdiy] blend or dry wet circuit for synth levels?   Dan Snazelle
  • [sdiy] blend or dry wet circuit for synth levels?   Scott Gravenhorst
• [sdiy] Fwd: FM math question   Ian Fritz
  • [sdiy] Fwd: FM math question   Ian Fritz
    • [sdiy] Fwd: FM math question   Magnus Danielson
      • [sdiy] Fwd: FM math question   Ian Fritz
      • [sdiy] Fwd: FM math question   Magnus Danielson
      • [sdiy] Fwd: FM math question   Ian Fritz
      • [sdiy] Fwd: FM math question   Magnus Danielson
      • [sdiy] Fwd: FM math question   Ian Fritz
• [sdiy] hello everyone   alf holm
• [sdiy] understanding a common resistor symbol   Dan Snazelle
  • [sdiy] understanding a common resistor symbol   John Mahoney
    • [sdiy] understanding a common resistor symbol   Mattias Rickardsson
  • [sdiy] understanding a common resistor symbol   Scott Gravenhorst
    • [sdiy] understanding a common resistor symbol   Dan Snazelle
      • [sdiy] understanding a common resistor symbol   harrybissell at wowway.com
      • [sdiy] understanding a common resistor symbol   Roy J. Tellason
      • [sdiy] understanding a common resistor symbol   Adam Schabtach
• [sdiy] Rubber pads source   Paul Dickow
  • [sdiy] Rubber pads source   Tom Arnold
  • [sdiy] Rubber pads source   John Mahoney
  • [sdiy] Rubber pads source   John Mahoney
  • [sdiy] Rubber pads source   Andre Majorel
  • [sdiy] Rubber pads source   David Anderson
• [sdiy] Voltage Regulators   Tom Arnold
  • [sdiy] Voltage Regulators   Paul Anderson
    • [sdiy] Voltage Regulators   Thomas Laskowski
      • [sdiy] Voltage Regulators   Seb Francis
      • [sdiy] Voltage Regulators   JH.
      • [sdiy] Voltage Regulators   Paul Perry
      • [sdiy] Voltage Regulators   Ian Fritz
  • [sdiy] Voltage Regulators   Ian Fritz
    • [sdiy] Voltage Regulators   Oakley Sound
      • [sdiy] Voltage Regulators   Needham, Alan
      • [sdiy] Voltage Regulators   Florian Anwander
      • [sdiy] Voltage Regulators   Ingo Debus
      • [sdiy] Voltage Regulators   harrybissell at wowway.com
      • [sdiy] Voltage Regulators   Ian Fritz
• [sdiy] And yet another report on my FPGA synth project   Jim Patchell
• [sdiy] drilling pcb boards...sore throat   Dan Snazelle
  • [sdiy] drilling pcb boards...sore throat   Paul Perry
  • [sdiy] drilling pcb boards...sore throat   John Luciani
    • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   John Blacet
      • [sdiy] drilling pcb boards...sore throat   Ian Fritz
      • [sdiy] drilling pcb boards...sore throat   John Blacet
      • [sdiy] drilling pcb boards...sore throat   Ian Fritz
      • [sdiy] drilling pcb boards...sore throat   David G. Dixon
      • [sdiy] drilling pcb boards...sore throat   Rainer Buchty
      • [sdiy] drilling pcb boards...sore throat   Tom Bugs
      • [sdiy] drilling pcb boards...sore throat   harrybissell at wowway.com
      • [sdiy] drilling pcb boards...sore throat   Mark Rivera
      • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   Robert Lorentz
      • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   Robert Lorentz
      • [sdiy] drilling pcb boards...sore throat   Paul Perry
      • [sdiy] drilling pcb boards...sore throat   John Blacet
      • [sdiy] drilling pcb boards...sore throat   Sean Ellis
      • [sdiy] drilling pcb boards...sore throat   Grant Richter
      • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   Barry Klein
      • [sdiy] drilling pcb boards...sore throat   Mark Rivera
      • [sdiy] More DIY hazards.....   John Blacet
      • [sdiy] More DIY hazards.....   John Mahoney
      • [sdiy] More DIY hazards.....   Andre Majorel
      • [sdiy] More DIY hazards.....   Oakley Sound
      • [sdiy] More DIY hazards.....   Dan Snazelle
      • [sdiy] More DIY hazards.....   John Luciani
      • [sdiy] More DIY hazards.....   Dave Kendall
      • [sdiy] More DIY hazards.....   James R. Coplin
      • [sdiy] More DIY hazards.....   Paul Schreiber
      • [sdiy] More DIY hazards.....   John Mahoney
  • [sdiy] drilling pcb boards...sore throat   Tom Arnold
    • [sdiy] drilling pcb boards...sore throat   Steve Carter
    • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   Tom Arnold
    • [sdiy] drilling pcb boards...sore throat   harrybissell at wowway.com
      • [sdiy] drilling pcb boards...   Dan Snazelle
      • [sdiy] drilling pcb boards...   harrybissell at wowway.com
      • [sdiy] drilling pcb boards...   John Luciani
      • [sdiy] drilling pcb boards...sore throat   David G. Dixon
      • [sdiy] There are prototyping options out there...   Grant Richter
      • [sdiy] drilling pcb boards...sore throat   Adam Schabtach
      • [sdiy] drilling pcb boards...sore throat   Jason Tribbeck
      • [sdiy] drilling pcb boards...sore throat   Jason Tribbeck
      • [sdiy] drilling pcb boards...sore throat   Dan Snazelle
      • [sdiy] drilling pcb boards...sore throat   David G. Dixon
• [sdiy] 3 band EQ   Derek Holzer
  • [sdiy] 3 band EQ   DAF
  • [sdiy] 3 band EQ   Florian Anwander
• [sdiy] Another Credit Crunch Victim   Csaba Zvekan
• [sdiy] tinning home etched boards?   Dan Snazelle
  • [sdiy] tinning home etched boards?   Adam Schabtach
    • [sdiy] tinning home etched boards?   Ben Lincoln
      • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Adam Schabtach
      • [sdiy] tinning home etched boards?   Adam Schabtach
      • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Ben Lincoln
      • [sdiy] tinning home etched boards?   David G. Dixon
      • [sdiy] tinning home etched boards?   Samppa Tolvanen
      • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Samppa Tolvanen
      • [sdiy] tinning home etched boards?   David G. Dixon
      • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Adam Schabtach
      • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Tom Bugs
      • [sdiy] tinning home etched boards?   Vesa Lahteenmaki
    • [sdiy] tinning home etched boards?   Dan Snazelle
      • [sdiy] tinning home etched boards?   Adam Schabtach
  • [sdiy] tinning home etched boards?   mark verbos
  • RE: RE: [sdiy] tinning home etched boards?   rdrake
    • [sdiy] tinning home etched boards?   Dan Snazelle
    • [sdiy] tinning home etched boards?   NSSINC
  • [sdiy] tinning home etched boards?   Justin Owen
    • [sdiy] tinning home etched boards?   Dan Snazelle
• [sdiy] Desperately seeking knobs for 6mm D-shaft, no pointer   Adam Schabtach
  • [sdiy] Desperately seeking knobs for 6mm D-shaft, no pointer   Sam Ecoff
  • [sdiy] Desperately seeking knobs for 6mm D-shaft, no pointer   Bob Weigel
    • [sdiy] Desperately seeking knobs for 6mm D-shaft, no pointer   julian Schmidt
• [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   Julian
  • [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   mark verbos
  • [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   Samppa Tolvanen
    • [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   Florian Anwander
  • [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   Oakley Sound
    • [sdiy] Does anyone have the Roland IR3109 datasheet? (looking into sh-101 filter modification)   ASSI
• [sdiy] FPGA synthesizer source code posted   Jim Patchell
  • [sdiy] FPGA synthesizer source code posted   Magnus Danielson
• [sdiy] Flat vs. round toggle switch actuators   Mattias Rickardsson
  • [sdiy] Flat vs. round toggle switch actuators   Sean Ellis
  • [sdiy] Flat vs. round toggle switch actuators   mark verbos
  • [sdiy] Flat vs. round toggle switch actuators   Justin Owen
  • [sdiy] Flat vs. round toggle switch actuators   Tim Daugard
  • [sdiy] Flat vs. round toggle switch actuators   harrybissell at wowway.com
    • [sdiy] Flat vs. round toggle switch actuators   Mattias Rickardsson
      • [sdiy] Flat vs. round toggle switch actuators   Antonio Tuzzi
  • Re: [sdiy] Flat vs. round toggle switch actuators   rdrake
    • [sdiy] Flat vs. round toggle switch actuators   Antonio Tuzzi
  • [sdiy] Flat vs. round toggle switch actuators   Andre Majorel
• [sdiy] Suitability of SA602 for audio?   Paul Anderson
• [sdiy] LED sockets?   Dan Snazelle
  • [sdiy] LED sockets?   Matthias.Herrmann at jeppesen.com
  • [sdiy] LED sockets?   Justin Owen
• [sdiy] panel mount toggle miniswitches   Antonio Tuzzi
  • [sdiy] panel mount toggle miniswitches   Julian
• [AH] Re: [sdiy] ... LED pollution on to vintage LEDs   cheater cheater
  • [AH] Re: [sdiy] ... LED pollution on to vintage LEDs   Louis van Dompselaar
• [sdiy] 1M log Omeg pots   Oakley Sound
  • [sdiy] 1M log Omeg pots   George Hearn
    • [sdiy] 1M log Omeg pots   Oakley Sound
      • [sdiy] PCBs from old films (USA)   harrybissell at wowway.com
      • [sdiy] PCBs from old films (USA)   Julian
      • [sdiy] PCBs from old films (USA)   John Blacet
      • [sdiy] PCBs from old films (USA)   Dave Manley
      • [sdiy] PCBs from old films (USA)   John Blacet
      • [sdiy] PCBs from old films (USA)   Dave Manley
      • [sdiy] PCBs from old films (USA)   harrybissell at wowway.com
      • [sdiy] PCBs from old films (USA)   mark verbos
      • [sdiy] PCBs from old films (USA)   harrybissell at wowway.com
• [sdiy] Trim out DC offset on MG-1?   tsheets at saturn5.com
  • [sdiy] Trim out DC offset on MG-1?   George Hearn
• [sdiy] Small form-factor PSU challenge!   Derek Holzer
  • [sdiy] Small form-factor PSU challenge!   Tom Bugs
    • [sdiy] Small form-factor PSU challenge!   Derek Holzer
      • [sdiy] Small form-factor PSU challenge!   David Anderson
      • [sdiy] Small form-factor PSU challenge!   harrybissell at wowway.com
      • [sdiy] Small form-factor PSU challenge!   George Hearn
      • [sdiy] Small form-factor PSU challenge!   Andre Majorel
      • [sdiy] Small form-factor PSU challenge!   David G. Dixon
      • [sdiy] Small form-factor PSU challenge!   David Anderson
• [sdiy] Sh-101 sliders   Karl Ekdahl
  • [sdiy] Sh-101 sliders   Tom Wiltshire
    • [sdiy] Sh-101 sliders   George Hearn
      • [sdiy] Sh-101 sliders   Tom Wiltshire
      • [sdiy] Sh-101 sliders   Karl Ekdahl
      • [sdiy] Sh-101 sliders   George Hearn
      • [sdiy] Sh-101 sliders   Florian Anwander
      • [sdiy] Sh-101 sliders   Florian Anwander
      • [sdiy] Sh-101 sliders   Karl Ekdahl
      • [sdiy] Sh-101 sliders   Karl Ekdahl
• [sdiy] San Francisco bay area gathering this Saturday 10/25/2008   Cary Roberts
• [sdiy] "Briefcase" modular..   Robert Lorentz
  • [sdiy] "Briefcase" modular..   Magnus Danielson
  • [sdiy] "Briefcase" modular..   Michael Zacherl
• [sdiy] PNW Synth Meeting   J.L.Marshall at comcast.net
• [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo ison it!   Forbes, William ALGLSG-LXES
  • [sdiy][OT] why does google suck SO bad for finding my parts? Yahoo is on it!   Florian Anwander
    • [sdiy][OT] why does google suck SO bad for finding my parts? Yahoo is on it!   Florian Anwander
      • [sdiy][OT] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy][OT] why does google suck SO bad for finding my parts? Yahoo is on it!   Florian Anwander
      • [sdiy][OT] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo ison it!   DrHeqx
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Roy J. Tellason
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Rainer Buchty
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Nate Reeves
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Florian Anwander
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   David Anderson
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Nate Reeves
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Florian Anwander
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] Improving sound doctorin' - how about wiki?   Kevin
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   BrightBoy
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Andre Majorel
  • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Johannes Öberg
    • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Samppa Tolvanen
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] why does google suck SO bad for finding my parts? Yahoo is on it!   Bob Weigel
      • [sdiy] W3C?   Bob Weigel
      • [sdiy] OT (was Re: W3C?)   Rainer Buchty
      • [sdiy] A major way to improve search engines. How can we implement this?   Bob Weigel
      • [sdiy] [OT] Re: A major way to improve search engines. How can we implement this?   John Mahoney
      • [sdiy] Re: [OT] Re: A major way to improve search engines. How can we implement this?   Bob Weigel
      • [sdiy] Re: [OT] Re: A major way to improve search engines. How can we implement this?   Derek Holzer
      • [sdiy] Re: [OT] Re: A major way to improve search engines. How can we implement this?   Roy J. Tellason
      • Re: [sdiy] W3C?   rdrake
• [sdiy] Alpha pots group buy   flight at flightofharmony.com
  • [sdiy] Alpha pots group buy   Louis van Dompselaar
    • [sdiy] Alpha pots group buy   Dan Snazelle
      • [sdiy] Alpha pots group buy   flightofharmony
      • [sdiy] Alpha pots group buy   Dan Snazelle
  • [sdiy] Alpha pots group buy   Andre Majorel
    • [sdiy] Alpha pots group buy   flightofharmony
      • [sdiy] Alpha pots group buy   Tom Bugs
      • [sdiy] Alpha pots group buy   flightofharmony
      • [sdiy] Alpha pots group buy   David G. Dixon
      • [sdiy] Alpha pots group buy   flightofharmony
      • [sdiy] Alpha pots group buy   Bruce Duncan
      • [sdiy] Alpha pots group buy   Tom Arnold
      • [sdiy] Alpha pots group buy   David G. Dixon
      • [sdiy] Pot mounting etc was: Alpha pots group buy   Mark Rivera
      • [sdiy] Alpha pots group buy   Tom Wiltshire
      • [sdiy] Alpha pots group buy   Louis van Dompselaar
      • [sdiy] Alpha pots group buy   Tom Bugs
      • [sdiy] Alpha pots group buy   Andre Majorel
      • [sdiy] Alpha pots group buy   Tom Arnold
      • Concentric shaft and illuminated slide pots (WAS: RE: [sdiy] Alpha pots group buy)   flightofharmony
      • Concentric shaft and illuminated slide pots (WAS: RE: [sdiy] Alpha pots group buy)   Kyle Stephens
      • Concentric shaft and illuminated slide pots (WAS: RE: [sdiy] Alpha pots group buy)   Tom Bugs
      • Sourcing parts (was Re: [sdiy] Alpha pots group buy)   Tom Wiltshire
      • Sourcing parts (was Re: [sdiy] Alpha pots group buy)   Dave Leith
  • [sdiy] Alpha pots group buy   Andre Majorel
    • [sdiy] Alpha pots group buy   flightofharmony
• [sdiy] CV questions..hardwiring   Dan Snazelle
  • [sdiy] CV questions..hardwiring   Dan Snazelle
    • [sdiy] CV questions..hardwiring   harrybissell at wowway.com
      • [sdiy] CV questions..hardwiring   Dan Snazelle
• [sdiy] Denon dn-2700f service notes   Nate Reeves
• [sdiy] Continuous controllers   Tom Wiltshire
  • [sdiy] Continuous controllers   mark verbos
  • [sdiy] Continuous controllers   George Hearn
  • [sdiy] Continuous controllers   Seb Francis
• [sdiy] Korg Polysix major problems   Karl Ekdahl
  • [sdiy] Korg Polysix major problems   Bob Weigel
    • [sdiy] Korg Polysix major problems   Ullrich Peter
    • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
      • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
      • [sdiy] Korg Polysix major problems - Update   Ullrich Peter
      • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
      • [sdiy] Korg Polysix major problems - Update   Bob Weigel
      • [sdiy] Korg Polysix major problems - Update   Ullrich Peter
      • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
      • [sdiy] Korg Polysix major problems - Update   Tobias Schilly
      • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
      • [sdiy] Korg Polysix major problems - Update   Karl Ekdahl
• [sdiy] The Mighty Korg KR-55   Dj Sinistral
  • [sdiy] The Mighty Korg KR-55   Tom Wiltshire
  • [sdiy] The Mighty Korg KR-55   Stewart Pye
    • [sdiy] The Mighty Korg KR-55   Stewart Pye
• [sdiy] special tightening tools?   Dan Snazelle
  • [sdiy] special tightening tools?   Mike
  • [sdiy] special tightening tools?   jeff brown
  • [sdiy] special tightening tools?   John Luciani
  • [sdiy] special tightening tools?   Neil Johnson
  • [sdiy] special tightening tools?   Florian Anwander
    • [sdiy] special tightening tools?   Derek Holzer
      • [sdiy] special tightening tools?   flightofharmony
      • [sdiy] special tightening tools?   David G. Dixon
      • [sdiy] special tightening tools?   Adam Schabtach
      • [sdiy] special tightening tools?   KA4HJH
      • [sdiy] special tightening tools?   Roy J. Tellason
  • [sdiy] special tightening tools?   Steve Ridley
  • [sdiy] special tightening tools?   David G. Dixon
  • [sdiy] special tightening tools?   Byron G. Jacquot
  • [sdiy] special tightening tools?   Dan Snazelle
    • [sdiy] special tightening tools?   Cynthia Webster
      • [sdiy] special tightening tools?   Dan Snazelle
  • [sdiy] special tightening tools?   jays at aracnet.com
  • [sdiy] special tightening tools?   BrightBoy
  • [sdiy] special tightening tools?   BrightBoy
• [sdiy] Guru help needed - very bad Vox Continental oscillator problem   Antti Pitkämäki
• [sdiy] Sh-101 Potentiometers this time   Karl Ekdahl
• [sdiy] Avnet Spartan-3A FPGA Board   Scott Gravenhorst
  • [sdiy] Avnet Spartan-3A FPGA Board   Csaba Zvekan
• [sdiy] Moog ladder filter paper - now with added diodes!   Tim Stinchcombe
  • [sdiy] Moog ladder filter paper - now with added diodes!   Scott Nordlund
    • [sdiy] Moog ladder filter paper - now with added diodes!   Antti Huovilainen
  • [sdiy] Moog ladder filter paper - now with added diodes!   Aaron Lanterman
• [sdiy] Really Small Linear Power Supplies ?   Ken Elhardt
  • [sdiy] Really Small Linear Power Supplies ?   John Mahoney
    • [sdiy] Really Small Linear Power Supplies ?   Graham Atkins
    • [sdiy] Really Small Linear Power Supplies ?   George Hearn
      • [sdiy] Really Small Linear Power Supplies ?   Colin Hinz
  • [sdiy] Really Small Linear Power Supplies ?   Ken Elhardt
    • [sdiy] Really Small Linear Power Supplies ?   xamboldt
      • [sdiy] Really Small Linear Power Supplies ?   harrybissell at wowway.com
    • [sdiy] Really Small Linear Power Supplies ?   flightofharmony
    • [sdiy] Really Small Linear Power Supplies ?   Ken Elhardt
  • [sdiy] Really Small Linear Power Supplies ?   Brett Maddaford
  • [sdiy] Really Small Linear Power Supplies ?   BrightBoy
    • [sdiy] Really Small Linear Power Supplies ?   Tom Arnold
    • [sdiy] Really Small Linear Power Supplies ?   Barry Klein
• [sdiy] Polymoog Coffee Table Photos   Ken Elhardt
• [sdiy] A couple of finds..   Seb Francis
  • [sdiy] Several pounds of POT(s) (UK only)   Tom Bugs
    • [sdiy] Re: Several pounds of POT(s) (UK only) ((GONE))   Tom Bugs
  • [sdiy] A couple of finds..   Florian Anwander
    • [sdiy] A couple of finds..   Seb Francis
    • [sdiy] A couple of finds..   Seb Francis
• [sdiy] low noise opamp for audio circuitry?   Dan Snazelle
  • [sdiy] low noise opamp for audio circuitry?   Ian Fritz
    • [sdiy] low noise opamp for audio circuitry?   Anthony Rolando
  • [sdiy] Knob ID for Alesis Mixer?   John Blacet
  • [sdiy] low noise opamp for audio circuitry?   Seb Francis
• [sdiy] korg poly 61 service notes?   Nate Reeves
  • [sdiy] korg poly 61 service notes?   Louis van Dompselaar
    • [sdiy] korg poly 61 service notes?   Nate Reeves
      • [sdiy] korg poly 61 service notes?   Bob Weigel
    • [sdiy] korg poly 61 service notes?   Roy J. Tellason
      • [sdiy] korg poly 61 service notes?   Bob Weigel
      • [sdiy] korg poly 61 service notes?   Nate Reeves
      • [sdiy] korg poly 61 service notes?   Bob Weigel
• [sdiy] euro supplier alpha full shaft 16mm pots   Derek Holzer
  • [sdiy] euro supplier alpha full shaft 16mm pots   Louis van Dompselaar
    • [sdiy] euro supplier alpha full shaft 16mm pots   Tom Bugs
      • [sdiy] euro supplier alpha full shaft 16mm pots   Dave Kendall
      • [sdiy] euro supplier alpha full shaft 16mm pots   Derek Holzer
      • [sdiy] euro supplier alpha full shaft 16mm pots   Derek Holzer
      • [sdiy] euro supplier alpha full shaft 16mm pots   Paul Perry
      • [sdiy] euro supplier alpha full shaft 16mm pots   Derek Holzer
      • [sdiy] euro supplier alpha full shaft 16mm pots   Tom Bugs
      • [sdiy] euro supplier alpha full shaft 16mm pots   Derek Holzer
      • [sdiy] euro supplier alpha full shaft 16mm pots   Graham Atkins
  • [sdiy] euro supplier alpha full shaft 16mm pots   Tom Bugs
    • [sdiy] euro supplier alpha full shaft 16mm pots   Louis van Dompselaar
• [sdiy] Re: KRL Tempco's   Louis van Dompselaar
  • [sdiy] Re: KRL Tempco's   Tom Arnold
• [sdiy] nice tutorial videos   mark verbos
  • [sdiy] nice tutorial videos   Tom Bugs
  • [sdiy] 40 Channel Filter Bank   Scott Juskiw
    • [sdiy] 40 Channel Filter Bank   JH.
• [sdiy] Re: [AH] Making holes in Aluminum?   Andre Majorel
  • [sdiy] Re: [AH] Making holes in Aluminum?   flightofharmony
    • [AH] RE: [sdiy] Re: [AH] Making holes in Aluminum?   flightofharmony
      • Metal sources WAS (RE: [AH] RE: [sdiy] Re: [AH] Making holes in Aluminum?)   flightofharmony
• [sdiy] Mystery CMOS chips...   Ian Smith
  • [sdiy] Mystery CMOS chips...   John Blacet
    • [sdiy] Mystery CMOS chips...   Paul Schreiber
      • [sdiy] Mystery CMOS chips...   Ian Smith
      • [sdiy] Mystery CMOS chips...   harrybissell at wowway.com
    • [sdiy] Mystery CMOS chips...   Ian Smith
      • [sdiy] Mystery CMOS chips...   Roy J. Tellason
  • [sdiy] Mystery CMOS chips...   Antonio Tuzzi
  • [sdiy] Mystery CMOS chips...   harrybissell at wowway.com
• [sdiy] CA3080's at Electronic Goldmine   Tim Ressel
  • RE: [sdiy] CA3080's at Electronic Goldmine   rdrake
  • [sdiy] CA3080's at Electronic Goldmine   BrightBoy
• [sdiy] AC Adapter - Getting Negative Voltages?   Ken Elhardt
  • [sdiy] AC Adapter - Getting Negative Voltages?   David Moylan
    • [sdiy] AC Adapter - Getting Negative Voltages?   mark verbos
  • [sdiy] AC Adapter - Getting Negative Voltages?   mcb, inc.
    • [sdiy] AC Adapter - Getting Negative Voltages?   Derek Holzer
      • [sdiy] AC Adapter - Getting Negative Voltages?   KA4HJH
      • [sdiy] AC Adapter - Getting Negative Voltages?   Ken Elhardt
      • [sdiy] AC Adapter - Getting Negative Voltages?   Ken Elhardt
      • [sdiy] AC Adapter - Getting Negative Voltages?   KA4HJH
      • [sdiy] AC Adapter - Getting Negative Voltages?   John Mahoney
      • [sdiy] AC Adapter - Getting Negative Voltages?   Ken Elhardt
      • [sdiy] Re: old switch mode supplies, was AC Adapter -   dragon.servicing
  • [sdiy] AC Adapter - Getting Negative Voltages?   ASSI
• [sdiy] Anyone in a need for an OBXa voice card ?   Gil W.
• [sdiy] iec connector confusion   Dan Snazelle
  • [sdiy] iec connector confusion   Jason Tribbeck
    • [sdiy] iec connector confusion   Dan Snazelle
      • [sdiy] iec connector confusion   Dan Snazelle
      • [sdiy] iec connector confusion   Jason Tribbeck
      • [sdiy] iec connector confusion   flightofharmony
      • [sdiy] iec connector confusion   Jason Tribbeck
      • [sdiy] iec connector confusion   Graham Atkins
      • [sdiy] iec connector confusion   Jason Tribbeck
      • [sdiy] iec connector confusion   Nathan Reeves
      • [sdiy] iec connector confusion   flightofharmony
      • [sdiy] iec connector confusion   Graham Atkins
      • [sdiy] iec connector confusion   Dave Manley
      • [sdiy] iec connector confusion   Dan Snazelle
      • [sdiy] iec connector confusion   Barry Klein
      • [sdiy] iec connector confusion   Eric Brombaugh
      • [sdiy] iec connector confusion   Dave Magnuson
      • [sdiy] iec connector confusion   harrybissell at wowway.com
      • [sdiy] iec connector confusion   Dave Magnuson
      • [sdiy] iec connector confusion   Jason Tribbeck
      • [sdiy] iec connector confusion   Dave Manley
      • [sdiy] Balanced Power   harrybissell at wowway.com
      • [sdiy] iec connector confusion   Dan Snazelle
      • [sdiy] iec connector confusion   Jason Tribbeck
      • [sdiy] iec connector confusion   ASSI
      • [sdiy] iec connector confusion   Barry Klein
      • [sdiy] iec connector confusion   ASSI
  • [sdiy] iec connector confusion   BrightBoy
• [sdiy] Mouser and Re'an knobs ( WAS: RE: [AH] Who Makes this Knob?)   flightofharmony
• [sdiy] Spin Semiconductor FV-1, anyone?   Adam Schabtach
  • [sdiy] Spin Semiconductor FV-1, anyone?   Tom Bugs
    • [sdiy] Spin Semiconductor FV-1, anyone?   John Loffink
      • [sdiy] Spin Semiconductor FV-1, anyone?   Adam Schabtach
  • [sdiy] Spin Semiconductor FV-1, anyone?   Tom Wiltshire
    • [sdiy] Spin Semiconductor FV-1, anyone?   Adam Schabtach
  • [sdiy] Spin Semiconductor FV-1, anyone?   Eric Brombaugh
    • [sdiy] Spin Semiconductor FV-1, anyone?   Tom Wiltshire
      • [sdiy] Spin Semiconductor FV-1, anyone?   Eric Brombaugh
    • [sdiy] finding a short in a Yamaha CS-50/CS-80   jpitt at fhcrc.org
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Bob Weigel
      • [sdiy] Arpeggiator to Midi to CV -s   Gergo Palatinszky
      • [sdiy] Arpeggiator to Midi to CV -s   Paul Perry
      • [sdiy] Arpeggiator to Midi to CV -s   Seb Francis
      • [sdiy] Arpeggiator to Midi to CV -s   Gergo Palatinszky
      • [sdiy] Arpeggiator to Midi to CV -s   Seb Francis
      • [sdiy] Arpeggiator to Midi to CV -s   David Anderson
      • [sdiy] Arpeggiator to Midi to CV -s   Sam Ecoff
      • [sdiy] Arpeggiator to Midi to CV -s   Scott Gravenhorst
      • [sdiy] Arpeggiator to Midi to CV -s   Neil Johnson
      • [sdiy] Arpeggiator to Midi to CV -s   Steve Ridley
      • [sdiy] Arpeggiator to Midi to CV -s   mark at arpeggi8.com
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Ingo Debus
      • [sdiy] Question on 120v/240v fuses and PowerOne PSU   Tom Bugs
      • [sdiy] Question on 120v/240v fuses and PowerOne PSU   harrybissell at wowway.com
      • [sdiy] Question on 120v/240v fuses and PowerOne PSU   Tom Bugs
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Csaba Zvekan
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Bob Weigel
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Csaba Zvekan
      • [sdiy] finding a short in a Yamaha CS-50/CS-80   Bob Weigel
    • [sdiy] Spin Semiconductor FV-1, anyone?   Adam Schabtach
• [sdiy] hello everybody   alf holm
• [sdiy] [OT(?)] -Eventide H3000 repair tips?   Barry Klein
  • [sdiy] [OT(?)] -Eventide H3000 repair tips?   Dan Norris
• [sdiy] Shorting pots   David G. Dixon
  • [sdiy] Shorting pots   Colin Hinz
  • [sdiy] Shorting pots   Tom Wiltshire
• [sdiy] What the heck is this for?   Eric Brombaugh
  • [sdiy] What the heck is this for?   Joe Grisso
    • [sdiy] What the heck is this for?   Neil Johnson
      • [sdiy] What the heck is this for?   Joe Grisso
      • [sdiy] What the heck is this for?   Tom Arnold
      • [sdiy] What the heck is this for?   Magnus Danielson
      • [sdiy] Joysticks and electronics RFQs   Tom Bugs
      • SV: [sdiy] Joysticks and electronics RFQs   Tom Bugs
  • [sdiy] What the heck is this for?   Paul Anderson
• [sdiy] Stacked Concentric Pots   Kyle Stephens
  • [sdiy] Stacked Concentric Pots   Louis van Dompselaar
• [sdiy] DB50XG soundcard, AK-4510-VC IC - what is it?   Matthias.Herrmann at jeppesen.com
• [sdiy] where to get Piher trimmers PH15 range or replacements in Europe ?   dragon.servicing
  • [sdiy] where to get Piher trimmers PH15 range or replacements in Europe ?   Louis van Dompselaar
• [sdiy] Rhodes stage 73 question   Karl Ekdahl
  • [sdiy] Rhodes stage 73 question   jeff brown
• [sdiy] Vestax multipole potentiometers   Johannes Öberg

Last message date: Fri Oct 31 22:23:29 CET 2008
Archived on: Tue Jun 3 23:33:21 CEST 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...