[sdiy] 2x16 Character LCD

[Laurie Biddulph]

Electrically the LCD will work fine with the MonoWave(X). Mechanically, the 
connector is in the wrong place for the MonoWave Front Panel PCB, not a 
problem if you wire up your own panel.

Best Regards

(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645

Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com

This e-mail and any files transmitted with it are confidential and intended 
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or 
otherwise use it, or any part of it, in any form whatsoever. If you have 
received this e-mail in error please notify the sender and ensure that all 
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the 
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence 
of computer viruses, Elby Designs will not be liable for any losses as a 
result of any viruses being passed on.

Please consider the environment before printing this email

----- Original Message ----- 
From: "Julian" <julian at port23.co.uk>
To: "Graham Atkins" <gatkins at blueyonder.co.uk>; "sdiy" 
<synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, December 03, 2008 11:56 PM
Subject: Re: [sdiy] 2x16 Character LCD


> Im not very knowledgable on LCD diplays -
>
> Is there any reason why this shouldnt work with
>
> a) Laurie Biddulphs revision of Paul Maddox's Monowave (which im 
> considering building sometime) (requires 2x16 etc)
>
> and
>
> b) as a replacement for the PLED module of Colin Fraser's P3 (mine has the 
> PLED, which is working fine, but if im ordering...)
>
> Thanks, Julian
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>