[sdiy] finding a short in a Yamaha CS-50/CS-80

[Ingo Debus]

Am 28.10.2008 um 21:38 schrieb jpitt at fhcrc.org:

> Do I have to desolder every single +15 and -15 line off every board  
> to track down the short or is there an easier way?

First thing I would do is search for anything that gets hot. Careful,  
the offending component probably gets *very* hot.

If this doesn't help, I'd take a close look at all tantalum  
capacitors (if there are any). I've seen failed ones that looked fine  
but had just a tiny silver ball (like a solder blob) on them.

Ingo