[sdiy] Sh-101 sliders

[Karl Ekdahl]

This talk about doing a joint buy is a good idea. So here's what i gather; the seller says he has all 16 sliders needed for the upper panel, this should be as follows;

11 * 100K (B)	VCO, VCA, LFO Mod, Pulse width, Square, Triangle, Sub, Noise, Freq, Res, VCF Env, VCF Kybd, Sustain
2 * 100K (A)	Rate, VCO Mod, VCF Mod
3 * 1M (A)	Attack, Decay, Release

So far what people on this list need is:

Karl	4 * 100K (B)
Tom	1 * 100K (B)
George	1 * 100K (B)
Gregory	1 * 100K (B)

So there's enough sliders for everyone, in fact there are to many. How do we divide this up, anyone care for spares? I could potentially be up for taking 1 * 100K (A) and 1 * 1M (A) as well..

Karl

--- Den ons 2008-10-22 skrev Tom Wiltshire <tom at electricdruid.net>:

> Från: Tom Wiltshire <tom at electricdruid.net>
> Ämne: Re: [sdiy] Sh-101 sliders
> Till: "synth DIY List" <synth-diy at dropmix.xs4all.nl>
> Kopia: "George Hearn" <georgehearn at btinternet.com>, "Karl Ekdahl" <elektrodwarf at yahoo.se>, "gregory zifcak" <zifcak at hotmail.com>
> Datum: onsdag 22 oktober 2008 01.01
> On 21 Oct 2008, at 21:24, gregory zifcak wrote:
> 
> > i also need an LFO MOD slider (probably 100k lin?) how
> much is the  
> > set?
> 
> The full pack of 16 sliders is $70 US from
> technologytransplant on  
> ebay. The pots are marked in the service manual as 100K A,
> 100K B,  
> and a few 1M A for the envelope.
> 
> So we're probably looking at about $20 each for 4
> sliders, unless  
> someone else out there wants some too?
> 
> Hopefully we don't all want the same ones.
> 
> T.


      __________________________________________________________
Låna pengar utan säkerhet. Jämför vilkor online hos Kelkoo.
http://www.kelkoo.se/c-100390123-lan-utan-sakerhet.html?partnerId=96915014