[sdiy] More DIY hazards.....

[John Blacet]

Those fumes from soldering flux...

If you are just building a board or two, then good venilation is probably
enough.

If you are doing more or are in production then I would like to rec a
handy fan with an activated charcoal filter made by Weller. The WSA350 is
about $50 but I saw a cheaper version on the web somewhere. It actually
does absorb the smoke and the filter lasts a very long time even in
production areas.

My production area used to reek from flux fumes but now there is NO odor!
-- 
John Blacet