[sdiy] Voltage Regulators

[Needham, Alan]

It has to be on a case-by-case basis - if a 7805 is OK (and I use loads
of them) then why make it any more complicated.
The 723 has >big< advantages if you are building a multi-rail supply
though, an overload on any one rail can shut the whole supply down
(sometimes essential).

I guess I agree with Ian and Tony in general (but with more faith in the
78xx series)
	Alan


_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654