[sdiy] Roland SH5 schematics and slider?

[GRAHAM ATKINS]

Hi Daniel,

There is a seller who uses both EBAY.COM and EBAY.CO.UK called  
CHIPSFORBRAINS. He has
had a lot of Roland parts "Re-made" in the far east, he does rotary  
and linear pots, control knobs, switches,
IC's and other bits, often as kits for certain Roland models. I'm  
pretty sure he did some Roland System
100 (Not 100M) parts recently from about the same time as the SH5.  
Keep looking out, he seems to put
several lots up then goes away for a month or so. Worth a look.

Graham

On May 14, 2008, at 13:15, Daniel Araya wrote:

> Hi,
>
> I have a battered old SH5 on the operating table and the schematic I  
> found online miss a few pages (PSU, tuning and adjustment  
> instructions) and has generally bad image quality on the schematics.
> Does anybody have a better scanned copy?
>
> The slider for S/H-rate is badly corroded, are there any sources for  
> spares? Its a 500k A slider with about 35mm stroke.
>
> Regards
>
> /Daniel
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>