[sdiy] Press-N-Peel Bluee and color laser printerS?

[Samppa Tolvanen]

On 5/6/08, Ben Lincoln <blincoln at eventualdecline.com> wrote:
> I've been doing mine freehand with my dremel-clone because I don't have an
>  X-Y table for my drill press (yet). Is an X-Y table what people typically
>  use, or are you all actually clamping and unclamping your boards for every
>  hole?
>

Simply hand positioning. Once learned how PCB vs. drill bit should
*look like* from the angle and inspection lenght my eyes are when
actually doing the drilling, positioning becomes pretty automated yet
accurate enough, so I don't spend much time per hole. I use toner
transfer and leave "drill hole" size inside the pad to 0,3mm which
seems to guide drill bit too.

Samppa