Re: [sdiy] Press-N-Peel Bluee and color laser printerS?

[rdrake]

i use my dremell in a stand--abt $40 stateside, and worth it.  i also use carbide drill bits, since steel gets unusably dull after about a dozen holes in fiberglass.  you can find them surplus pretty easy.  they are brittle, tho and will shatter w/ any lateral stress, so a press (and googles!) are essential.

bbob
www.fluxmonkey.com

>----- ------- Original Message ------- -----
>From: blincoln at eventualdecline.com
>To: synth-diy at dropmix.xs4all.nl
>Sent: Tue, 6 May 2008 -0700 (PDT) 09:02:13
>
>I've been doing mine freehand with my dremel-clone
>because I don't have an
>X-Y table for my drill press (yet). Is an X-Y table
>what people typically
>use, or are you all actually clamping and
>unclamping your boards for every
>hole?
>
>On Tue, May 6, 2008 8:30 am, Samppa Tolvanen said:
>
>> After few carefully drilled holes, it really
>speeds up the process as
>> You learn to be confident on visual inspection
>that the drill bit is
>> really "spot on".
>
>
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy