[sdiy] 723-based power supply around 400ma

[groovyshaman]

Good point, I just rather spend the time building these JH projects!

-George

mike ruberto wrote:
> I can't think of any that use the 723 anymore. However, a 723 based
> supply for 400ma would consist of a 723 and maybe a 2N2222 or TIP31.
> Not hard at all to work up if you change your mind about DIYing it.
> 
> Mike
> 
> On Wed, Mar 5, 2008 at 11:08 PM, groovyshaman <groovyshaman at snet.net> wrote:
>> Does anyone know of a supplier for a 723-based power supply that is
>>  rated around 400ma?  Power-One and International-Power are both
>>  3-terminal based designs at that current spec.  I would prefer to NOT
>>  build my own if possible.
>>
>>  -George
>>  _______________________________________________
>>  Synth-diy mailing list
>>  Synth-diy at dropmix.xs4all.nl
>>  http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>