[sdiy] 723-based power supply around 400ma

[mike ruberto]

I can't think of any that use the 723 anymore. However, a 723 based
supply for 400ma would consist of a 723 and maybe a 2N2222 or TIP31.
Not hard at all to work up if you change your mind about DIYing it.

Mike

On Wed, Mar 5, 2008 at 11:08 PM, groovyshaman <groovyshaman at snet.net> wrote:
> Does anyone know of a supplier for a 723-based power supply that is
>  rated around 400ma?  Power-One and International-Power are both
>  3-terminal based designs at that current spec.  I would prefer to NOT
>  build my own if possible.
>
>  -George
>  _______________________________________________
>  Synth-diy mailing list
>  Synth-diy at dropmix.xs4all.nl
>  http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>