[sdiy] Re: [AH] Tassilo helps testing the String Filter prototype
JH.
jhaible at debitel.net
Wed Jun 25 14:01:55 CEST 2008
Ah, I see.
The previous one didn't have any particular overdrive problem, either.
If there was anything like that in the samples, it's been the quick and
dirty recording setup.
For old and new version:
Without the Vactrol installed, it clips like any opamp circuit does.
With the Vactrol, it gradually goes "dirty" instead of clipping.
This is mostly an issue if you increase resonance up to self-oscillation;
not so for ordinary operation.
JH.
>Over-drive. 8)
>On 6/25/08, JH. <jhaible at debitel.net> wrote:
> Drive?
>
>
> JH.
>
>
> ----- Original Message -----
> From: "cheater cheater" <cheater00 at gmail.com>
> To: "JH." <jhaible at debitel.net>
> Sent: Wednesday, June 25, 2008 12:54 PM
> Subject: Re: [sdiy] Re: [AH] Tassilo helps testing the String Filter
> prototype
>
>
> I'll have to check the new one's sounds and approve :)
> How does the new one drive?
>
> D.
> On 6/25/08, JH. <jhaible at debitel.net> wrote:
> > > So is the string filter finally lifting off?
> >
> >
> > Oh yes - I've made a complete redesign.
> >
> > Boards are shipping right now to all who have preordered.
> > There's not much overproduction this time, or to be more precise, a
> lot
> > of
> > orders came after production started.
> > There's only about 15 PCB sets left.
> >
> >
> > >I thought it used to be too unstable.
> > >Some old recordings I heard went into heavy clipping too easily I
> > thought?
> >
> >
> > The problem was that it was only stable with NE5532s of a certain date
> > code - don't laugh. :)
> > So I had a perfectly working device, but it would have been commercial
> > suicide to offer something like that in quantities.
> >
> > The new version uses a different filter topology alltogether (2-opamp
> > biquad
> > with Deboo-integrator),
> > and it works with TL072s.
> >
> >
> > JH.
> >
> >
>
>
>
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
More information about the Synth-diy
mailing list