[sdiy] JH. Hammond Scanner Vibrato emulation: taking orders now

[JH.]

Hi,

I have sucessfully built and tested a prototype of my new PCB project, and 
I'm
starting to take pre-orders for these PCBs now.

To avoid any confusion: There is *one* PCB that allows to build two
different projects:

(1) 9-Stage Interpolating Scanner Module with onboard VC LFO

(2) Emulation of Hammond Scanner Chorus / Vibrato

I've sent out two separate mails for the two applications, but it's based on
the *same* PCB.

So if you want to build three Interpolating Scanner modules plus two Chorus
/ Vibrato devices, simply order 5 "Scanner PCBs", using the order form
below.

A description of the projects can be found here:
http://www.jhaible.heim.at/interpolating_scanner_and_scanvib/jh_interpolating_scanner_and_scanvib.html

In addition to the sound effect, this could be a quite nice optical effect 
in your front panel, too:
http://electro-music.com/forum/phpbb-files/jh_scanvib_2008_quick_and_dirty_466.mov
(Better sound samples are on my web site, see above.)

Like the previous Tau project, the PCB allows the connection of a mains
transformer + fuses if you are skilled in working on mains voltage, or the
connection of an AC wallwart of about 16 ... 18V (AC), or you can power it
from a clean +/-15V Dual DC power supply.
For the latter, you'll have to solder in wires, however. There was no room
for a MOTM or synthesizers.com power connector.


Scanner order form
=================================================================================

Email subjet line: "Scanner PCB order [n] sets of boards"

=================================================================================

Email text:

I'm ordering [n] Scanner PCBs


for EUR 27.00 per board

plus EUR 4.00 for shipping and handling per order.


There may be addional tax and / or customs fees in my country - these will
be paid by me (the buyer), not by the seller.

I'm aware that I'm only buying a blank PCB that may help me building a
Scanner module - I'm *not* buying a diy kit, not a "project" -  just a pice 
of FR4 with
copper traces. By placing my order, I agree to these terms.

My adress is:

[Full shipping adress, as it will appear on the envelope for sending you the

PCBs]

My paypal adress is:

[your paypal adress]

========================================================================================

(Don't forget the email subject line with the number of PCBs ! )

Looking forward to hear from you,

JH.